Search results

Make this tread sticky, its hard to find since all this spam!

Hi I have a Palmer drive that has very very slow image speed, with many unreadable sectors, But I dont if its weak head or bad surface, or maybe FW issue, is there any suggestion ? I disable updating mod 190 and try fixing slow in Ram, but nothing changed, still very slow imaging like 8 sector...

I think its corrupted cus my MRT could not creat unlocked rom.

Hi WDC WD10SPCX-08S8TT0 MRT can not detect family, anyone know the family?

Hi, anyone know how to connect terminal to 800067-001 ?

Could you explain more? edit to what? change what value ?

Hi I have this drive and after 20-30 second get ready in MRT but no ID or capacity, any way to get detect on this model? do I need to load loader ?

Thanks for answer, I thought maybe an easy solution to this, There is an option in MRT that do this process automaticaly and I used it before but I dont know why that dont work in this hdd.

Still waiting for suggestion guys.

Hi I have a St2000LM007 that taken to another DR company before me. and it seems they regen translator without backup sys files. and I access to about the first 300GB of drive and beyond that, access problem so how is the chance to get data?

Yes I can read, no problem. I begin to think maybe in some ways I did not know, sys 35 got changed or corrupted, is it possible ? let assume it changed and I dont have orig 35 , what method you suggest for repairing drive?

Hi Do I need 800066 unlocked board to use or any board do the job ?

Hi I have ST2000LM007-1R8174 that one copy of sys file 1D2 damaged and i write other copy to dmaged one to get drive fully detect and functional, And i have to say didnt recalculate translator or any touch to sys 35 or 28 BUT I only access until 664258543 and after that from the end of drive...

I know its translator, Unfortunately No, all 2 copy is corrupted. any other way to read sys 28 ?

Hi I have this drive and have ID and with zero capacity, but not access to User area , and it seem sys file 28 is corrupted because I cant read it in anyway, any advice ? Power On Boot 0x80M ---Mrt UnLock--- LockCode:0xB3977E5A LockKey: Rst 0x80MSrv DETCR init 0x0000 EDAC Value =...

I Get its Loader and have this option in MRT, what would you suggest I use?

Unfortunately I only have mrt, I have to see if im able to simulate PC3K method In mrt

Hey guys I have this OLD drive and no to access to Users data No strange noise, and this is terminal, any advise ? Reset 1024k x 16 DRAM NHAWK - 1_Disk S-42 03-27-07_13:01 HM SFI ! (P)SATA Reset Failed sys sect. write! Nwt Er 7c RdWr 1349c.00.0002 Read Ver Retrys Read Ver Retrys Read Ver...

Thanks, yes put jumper as Master and get detect.

Hi there is this drive with no Detect at all, and I have no experience in Pata drives, any tip to get Detect ? I have MRT Ultra.

Some info From MRTLab

Some info from MRTLab

Hi what is Sata board for G0039A USB ?

Hi Anyone have loader for this drive ? thanks.

Can anyone confirm 701675 ---> 771672 , because I changed but not worked for me, maybe my sata PCB faulty ?

I want to know , without unlocked pcb , is there a chance to get data ? and I have to say again, no need to edit SA, just using Data explorer in MRT.

Yes , unfortunately Unlocked PCB dont available for me, And I have MRT Ultra with me, But as you say if data encrypted I dont have chance to get data , yes ? MRT have option to decrypt some WD drives as older my passports, maybe I can use that ?

Hi I dont have PCB 800066, Is there a way to convert 800069 to SATA ? I need to recover data and I dont need to see and edit SA , just want to use data explorer in MRT, So is there a way to change this board to SATA ? For example like this board...

In ID mode and ABA mode all modules are OKay, but in Tracks mode almost all module are zero or incorrect values. Some of modules in tracks mode

With all respect, how to upload module 11 if hard is in busy mode? at least in MRT we cant, and as i say before its a routine procedure and i used and repair many drive with this method. and module 2 is load to get user area. okay i have SA access but not user area, what is next?

Hi I have this drive and has no detect at all and no strange noise So I many time try to load loader but I cant get detect , any solution? this is log of MRT try to load loader from own drive Technology mode key : ..........................: OK RAM: Read HDD Info ...

Hi I have this drive and Probably Media Cache issue , But after enter F3 T>/c F3 C>U1 Invalid Diag Cmd F3 C>U2 Invalid Diag Cmd F3 C>U3 Invalid Diag Cmd and already use ( F"MediaCacheControl",00,22 ) but not solve issue any other command to repair Media Cache ?

Hi is there any command to clear NRG list ?

Okay, what info do you need?

Really no one have any experience with rosewood here?

So I get virtual start file , but sadly not solve probelm, So i contact MRT Support, and they told me in MRT 2.1.4.1 I can fix this issue, but mine is 2.1.3.1 :( now im looking for new way!

Hi So I have this drive that I cant read any LBAs of User area, I unlock firmware with MRT , and during backup sys files, suddenly mrt cant bakup anymore , and when power on/off I got this error on Terminal LED:0x000000EE FAddr:0x0056D1F2 and can not access terminal anymore, any solution ?

Hi Is there any topic for Learn patching sys file 93?

Thanks, it seems head problem.

Hi I need KC44 Virtual3D File for Virtual start, anyone have it?

Interesting, whats the model of drives you test?

the problem is i dont have terminal access in MRT OKay ,after change speed to 9600 get access to terminal , /1N1 and done :P

Just repair, as i say after drive gets ready, everything is normal.

I think in newer seagate drive should clear NRG first if we want to rebuild translator, yes ?

Hi I have this drive i want to clear smart, and I have MRT Ultra, but mrt does not support this drive, any way to Clear?

Hi I have this drive and it almost took 2min to detect and ready but when get ready its fully fanctional and normal. I already have done this act but not fix problem clear alt list regen translator clear smart i think with some F command in terminal maybe solve the problem but I really dont...

yes but not always true, in some dirve for Testing i done G2P and data do not change a bit!

Thanks, so for /7X which number should considered as good for resistance ? lower better or higher?

Hi, is there command for check heads health?

Hi I have drive with this board 771801, is there any board except 771823 to use? or only 771823 compatible ?

So, I manage to get F3, how to patch sys file 93?

But I dont access to sys files, nor terminal, any other way to get sys files?

i test several other 3d modules but with them i didnt even get F3 . I even replace pcb but nothing changed. this is when normally start drive Boot 0x40M Spin Up RECOV Servo Op=0100 Resp=0005 Trans. Spin Up SpinOK TCC:001C (P) SATA Reset

Yes i Know about M commands, but Data not important, just want to repair drive.

Hi Normally cant get F3 with this drive, so with Virtual start function in MRT I get F3 , but almost all terminal command not work like : F3 T>i4,1,22 Overlay PartNum: 02191019 CFW PartNum: 04191054 Overlay CompileDate: 20130219 CFW CompileDate: 20130419 OverlayCompatibilityCheck failed...

Hi in this drive i have no detect and no terminal, so with "http://us.mrtlab.com/tech/seagate/256.html" method invented by MRT LAB I can get F3 and full detect temporary so i do m0,2,2,,,,,22 and m0,6,3,,,,,22 , but not solve problem. this is terminal when i start normally drive...

Hi I have this drive that head #4 is currupt and dont work, but is seems it dosent support cut head in mrt, is there a way to Off head #4 ? like manually change rom oo head map?

mayby MRT bug, but even in adding single sectors it goes on error. any free app to add LBAs to glist ?

Hi Detect Problem in treminal shows  SPW 3.0G LinkOk!5V: 05030 SpnOk spd: 0000 0000 0000 H: +00000 ADC: 0006 DAC: 7687 SK C: 0001AF85 ENG>SRV> SvoTbl Loaded CL 2306 CM 2377 SL 0E7B SM 0E76 BD FdtTbl Loaded Data Not important.

Hi in this drive I want to write some LBAs to Glist for remaping bad sectors, but every time I try its failed, I can directly write in Glist module , and there is no error on others modules. and use MRT ultra for this operation. any way to solve problem?

so by reading other topics i found i did not disable SED at all.

But i dont know if i disable it or not :lol:

how to re-enable SED ?

I already put back original USB board but data still encrypted, so what is the Use of clone in another drive with same USB controler ? you think maybe usb board has issue ? I already do that and they said at the moment board 1961 not supported to decryption and they going to add in next update...

okay, so in that case, what can i do? is there any way to get data ?

I dont think its MRT bug, i have access to mod 25.

hi again when i try to decrypt in mrt this happened, I asked costumer and he say he didnt set password on hard, could it be for damaged module ?

So I manage to load ldr to drive somehow :o , and i don't now how exactly I do that, but drive now functionally normal. thanks guys for guides.

Its same version, and i test one from patient drive modules and one downloaded from hddsurgery

yes , disable head.

Hi what is the best and safest way to shield bad head in MRT for western digital drives ? use shield head tools or using " Initialize self test environment" ?

No I'm using LDR from same model and ROM Firmware version, isn't that enough for to be match? In MRT we don't Dir or at least I dont know about that, but when i try to load ldr it get error on loading module 11

OK, thanks.

Hi in step 4 I get error on load module 11 , any way to solve that?

I don't believe in that but okay, so tell me, in this case with pc3000 what you do? maybe i can do it with MRT

What is PC3000 can do that MRT cant ? can you tell me? what you want to do to this drive with pc3000? MRT is a powerfull tool.

So as I mention before I dont have access to data, module and etc, after disable module 411 , i can read and write module but not access to Data, I already contact with MRT support but he neither to solve problem and say its error on module 411. I dont know what to do more and cantacting this...

Hi I have this and replace board to sata so i cant access to user data and module and ... so after disable module 411 i can access to module and ... I try to write loader with modules , module 411 and 1B successfully write but 11 with error, and not helping at all. so whats other option I have...

Thanks a lot. in all of WD drives Module #11 is loader?

Yes, thats what is shows me on MRT Ultra.

Hi I need Loader from this driver WD10EZRX-00L4HB0-01.01A01

?

So if Preapm not the same, I cant use for head swap? by the way I dont access terminal , after power on Boot 0x10M Spin Up FAIL Servo Op=0100 Resp=0007 ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF FAIL Servo Op=0100 Resp=0007...

Hi i have this drive ST500DM002 s/n: z2axdp6s p/n: 1BD142-302 Firmware : KC45 Data Code : 12473 Site code : TK So which detail of donor drive should be exact the same as failure drive?

Only PC3K ? Mrt Ultra can not handle that issue?

I just put paper between pcb and spindle to get F3 but not succses at that.

Hi I have this hard drive, and that stays at busy and on terminal LED:000000CD FAddr:0000FEDB LED:000000CD FAddr:0000FEDB any solution? I have MRT ultra.

Thanks guys.

so you sure with head-swap I can recover data?

When switch on i got the following error in terminal and spin down Boot 0x10M Spin Up FAIL Servo Op=0100 Resp=0007 ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF FAIL Servo Op=0100 Resp=0007 ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000...

Sorry my english is not so good, what you try to say? Is there any solution to access internal memory?

Hi I have this HDD ( model:ST31000340NS EIT firmware version:MS03 serial number:9QJ38T12 ) and now it have write cache disabled and no luck to enable that with HDD feautur settings, is there any other way to enable write cache?

Hi how to direct access to internal memory in rooted phone to data recovery?