Sector access Intruption ??

Don't Lose Your Data Forever!

DIY data recovery has risks. You could lose your data forever! Don't want to risk it? Talk to a professional now.

Hi I have ST2000LM007-1R8174 that one copy of sys file 1D2 damaged and i write other copy to dmaged one to get drive fully detect and functional, And i have to say didnt recalculate translator or any touch to sys 35 or 28 BUT I only access until 664258543 and after that from the end of drive nothing, IS this Sector access Intruption?
this is log after try reading beyond 664258543

Code:
[offtopic]Boot 0x80M
---Mrt UnLock---
LockCode:0xB3DCBD6F
LockKey:
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
MSP213
(MC POR Duration): 0000000045
Send Status: COMRESET seen
CSpd= 6Gbps
DSC
Set Transfer Mode selected
Ultra DMA selected
Starting LBA of RW Request=0004F2F69D Length=FFFFFFFF
ProcessRWError -Read- at LBA 0004F2F8FE Sense Code=43110081
Hd 3 Err Blk 4F2F8FE BER pre -1.764781
Out:
ResetAbortDst

SP Regen FAIL
SP Regen ABORTED
SPRegen [0007|00000081] @LBA=0x04F2F8FEResetAbortDST
ResetAbortDST
(S) SATA Reset

Send Status: COMRESET seen
CSpd= 6Gbps
Starting LBA of RW Request=0004F2F8FE Length=FFFFFFFF
ProcessRWError -Read- at LBA 0004F2F8FE Sense Code=43110081
Hd 3 Err Blk 4F2F8FE BER pre -1.766003
Out:
ResetAbortDst
R
SP Regen FAIL
SP Regen ABORTED
SPRegen [0007|00000081] @LBA=0x04F2F8FEesetAbortDST
ResetAbortDST
(S) SATA Reset

Send Status: COMRESET seen
CSpd= 6Gbps
Starting LBA of RW Request=0004F2F8FE Length=FFFFFFFF
ProcessRWError -Read- at LBA 0004F2F8FE Sense Code=43110081
Hd 3 Err Blk 4F2F8FE BER pre -1.657814
Out:
SP Regen FAIL
SPRegen [0000|43160080] @LBA=0x04F2F8FEOut:
Unrecoverable Error CB
Unrecoverable Read Verify Error Reported
PowerState = IDLE1
VC0[/offtopic]
 

Jared

Administrator
Staff member
Can you still read lower LBA sectors, or is it now doing this on all sectors?
 
Yes I can read, no problem. I begin to think maybe in some ways I did not know, sys 35 got changed or corrupted, is it possible ? let assume it changed and I dont have orig 35 , what method you suggest for repairing drive?
 
Top