Search results

yes i tried head map with disable heads.... ,When I block the SA, then hdd getting smooth spinning and I can access the SA

sending 02 thanks....

Thanks Jared, YES I can read module 190 with both copies

I have a WD 2tb Desktop HDD with "continues Power Re boot " . Model : WD20EZAZ-00L9GB0. i CHANGE THE PCB, UNLOCKED PCB, MODULES 2& 32, HEAD. Still problem persist. When Block the SA with the help of Unlock PCB , then no problem(pwr re boot) and continuous spinning and i can access the SA and...

thanks jared, the case was solved. I did the "patch the Rom " process again with highest com port speed and now i am able to do the data access thanks once again

hello to all, I hv one 1tb Seag Mobile hdd family :Rosewood , FW: SDM 2 . Smooth spinning, module can access... But no ID and Capacity....i tried to remove the background process from 93h... no luck... showing error in terminal...

update: model: " WD10JPVX-60JC3T1 " family: fblite 2.5 fw/rom revision : 00160094

hi to all I need for LDR of WD 1 tb Laptop HDD model no." WD10JPVX-60JC3T1 " if any body have plz provide thanks betty

thanks Jared I would go for the donor with same f/w... Also any one have the same hdd please upload the ROM &NV-RAM HITACHI 1 TB P/N:HX123Z9H MODEL:HDS5C1010CLA382 MLC:JPC3MA FW:3MA

thanks jared, I upload copy 1 ,2 one by one... but no Spin ... i tried rest other copies... same result May be the rom files were corrupted . Is it possible ?

One more thing is that, the size of original NV_RAM is 4 KB and the new one is 5 KB . Is it possible of size difference ?

thanks Jared.. I tried to write the nv-ram which u had given... but the following error showing.... Test : Reading NV-RAM Copies.................................. : Working Reading NV-RAM to profile folder (D:\Program Files\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\nilesh...

I have got a same case here that's like jared's case ! that's NVRAM orROM corrupted I've tried writing the NVRAM to another PCB - no spin I've tried physically moving the entire ROM to a new PCB - no spin I've confirmed with the customer and their computer guy that they never tried replacing...

I hv one 2tb Seag Desktop hdd family :Grenada , smooth spinning, module can access... But no ID and Capacity....i remove the background proccess from 93h... no luck... I tried to translator regen ,after taking and imp system files... , but not completing the trans regen .. it giving the...

Thanks Jol, Yes PCB Original. I am not able to access the SA... Also i am facing the same problem with 3 hdd with same Model. At present I don't have donar hdd for the " hot swapping" . Betty

hi All I have Samsung 160gb HDD with HD161HJ model with busy state and spinning.... giving the terminal below... SPW 3.0G LinkOk!5V: 04928 SpnOk spd: 0000 0000 0000 H: +00000 ADC: 0005 DAC: 6882 SK C: 00019364 ENG>SRV> SvoTbl Loaded CL E85C CM E693 SL 0328 SM 0603 BD FdtTbl Loaded ***...

thanks jol i wl try with this one

right pclab,... that's Makalu family ... In hdd guru i have seen the same family, which is upload by you... I download it but not possible to extract due to damage of file... betty

ROM F/W version is: 0005005M

update: this is WD BLACK

DRIVE MAKE : WD 2.5" MODEL : WD5000LPLX-75ZNTTO Capacity : 500 GB

plz anyone have the LDR of this model , plz help MODEL : WD5000LPLX-75ZNTTO thankz

hi if any body have LDR of the this model plz help DRIVE MAKE : WD 2.5" MODEL : WD5000LPLX-75ZNTTO thanks

Hi to all I have WD 2tb Desktop HDD with ID& Capacity . But the terminal shows the following message. due to the error i am not able to access the sector Techno mode key......................... : Ok RAM: HDD Info reading........................ : Ok Heads number...

Yes PClab I I have already selected the decryption option . Sam do you mean that, Make image disk of the patient hdd with decryption option and then work on image disk with help of WD tools. Isn't ?

I have 2tb WD Usb Hdd and i convert it to SATA ... Now its working with Error SED .. I followed the following thread "http://blog.acelaboratory.com/pc-3000-hdd-how-to-solve-sed-problem-in-25-wd-drives.html ".. after that everything OK.. But When i trying to recover the data i can't get any data...

The problem related to HEAD only.. I changed the Head and recovery is going on..... thanks to all

that was simply saying .... I wl try as per your advice and let u know

Even I m not able to access the modules. betty

hi jol, can u plz more explain ...

In the 1tb Toshiba Ist i changed the Heads. After that the same sound. So in this 500 gb i changed the pcb and the spinning is ok. but when i transfer the NVRAM,, hdd making the sound betty

thanks Jared Yes i am sure both HDD s Head map is same. Same model and make everything. The same problem I am facing with another 1tb toshiba HDD. betty

TOSHIBA 500 GB 3.5" SATA is initially making clicking sound. So i thought may be head issue. But when i change PCB , hdd is smoothly running without any sound , but no ID & Capacity. then I change the original NVRAM to Donor pcb. after that again hdd start the clicking sound. then i again...

I am able to read modules and hard drive resources. AB and B level modules all are OK

Amarbir, yes i got the mft. Now i completed the work . but some of the files which is in folder structure , is damaged. So i recovered data in RAW. All Raw files maximum are good. Still I am eager to know that what is the remedy to solve the problem? betty

Hitachi HUA722010CLA331,said HDD came with no detection . I was changed the PCB (not exactly matched as per the label pasted on pcb) and rom and now its working with help of "hdd translator initialisation in RAM" . i can see the ID & Capacity also i can access full sector . But i notice one...

at present logical recovery is going on by using R-Studio 8.0

problem is folder wise i am not getting the data. Is it advisable to do the translator regeneration ?

yes. I am able to get files in folder structure. but most of the files are damaged. One thing, RAW recovery able to get all files with good condition. . All Heads are ok

WD 10ezrx 1tb hdd with no detection but spinning . I had followed the Slow Responding problem as per ACe. no solution. then i open the module 02 and fill "0" in some of the sector as per the ACe blog " http://blog.acelaboratory.com/pc-3000-h ... rives.html". after that i got the ID and...

l If anybody have the LDR/Modules please provide it for me. SEAGATE 7200.12 500 GB Model:ST3500418AS FW:CC33 Betty crystal.

Model: ST2000DM001-FW-CC25 Hello To all, I am not able to read ROM through BOOTCODE option . Any body can tell the " shortpoint " of the particular model. once again I wanted to read the ROM information via boot code access. My Purpose is to disable one or more heads of hdd please throw...

Larry &Jol, At present imaging is going on with help of sata conversion. Once it completed , i will surely try to find out the real rom .

@Larry, Rom IC is IC6 and only one flash ic is there , if i am not wrong. which I transfer to SATA Board. Also IC2 also there. But i think that is not flash ic. plz update

i had transfer IC 6 from usb to IC602 on sata board in proper manner. also i am adding the SATA board pic

Hi Larry, Of course, i have transfer the IC6 to 601. Before i change the IC6 i just check the sata with usb hdd and it was working. i mean spindle motor was in working condition. after i change the ic6 the sata is not working on the usb hdd. even not spinning spindle. so...

hello Larry As per your marking on the pcb, now i am able to access the hdd with full capacity and imaging. But some times its showing the busy state and cant read the sector smoothly. i mean some error prevented to read the sector.Also in utility there have no model which...

Thanks Larry I tried to make connections in 8 different ways. I could not success. Only "Err" register indicating. Now i am trying with Equivalent Sata Pcb.Once it completed let you update the status of the task. betty

thanks Larry, I just started the work. I disconnect the Said capacitor and now i am confuse that which pin connect to Sata connector(ie pin no 2,3,5,6 and rest are the GND). I mean upper side connection is represent to 1 & 2 and lower pins represent to 5 ,6 . Is it right or any connection can...

Hi, I tried but not getting compaitable. also if the Sata conversion is possible, i thought go with SATA conversion. If u have experience with the same model plz give some idea regarding pin config and pin sequence Betty Crystal Data Recovery Lab Maharashtra

hai to all, [ i got a toshiba 2tb usb hdd with serial MQ03UBB200 so the SATA equivalent should be MQ03ABB200 which uses the G3918A PCB. But I am unable to get the equivalent pcb. So any body help to make sata connection on the usb pcb. Even i tried to make the connection . but not...

Hello Jared, May be something I was missed. Please provide your skype ID and whenever you are login the skype i wl let you know. Also my login ID is Betty.Abraham Betty

Dear all, I got one hdd WD32000AAKS-75L9A0 with clicking sound and spindown after the some click. so the following proccess i have done: 1) Block SA Access ...no success 2) disabled head 0 and then spinning is there. 3) Upload Dir into HDD RAM -load from hdd SA and LDR upload 4)...

Hai to all, One of my customer hdd have got infection of "Cerber Ransomware" Virus. All files converted their extension to "cerber". Any solution for this problem Betty

i did't try. because the demo is not giving such a result.

Amarbir, No Success.. Still I am searching on that task. Betty

hello jol, I again and again i tried the short-pin process and now i got the terminal. At present i can access the F3 T> but the file translator 28h is corrupted or the sector is bad. so that i cant take the bakup of that file 28h or the translator regen also not functioning. I could able...

hai, i have the mistake, model is ST500DM002, FW: JC4B. Actually, I didn't checked the terminal , before head stack replacment. But the drive was working condition,(donor -drive). Now i change the pcb of SAME model, after that continues spinning is with hdd(patient) betty

Hello to all, I have seagate ST3500DM002,Fw:JC48, had the problem with head. start and spindown with sound. I replaced with head of same model and now it has DRD and DRD with spinning . But no ID and No terminal. I also tried short -pin and but nothing happen. Ctrl Z nothing help...

Thanks to all, original issue was head... clicking and spin down.. i m giving down the terminal out put of patient: ActiveFW : 00 FWVer : 0001 SATA PLL cal done DDR size detected = 16MB DDR size detected = 16MB *PAUNI_L2958*PA VID=0011 PN=000D Rev=0001- PA_LSI2958 Found...

above model I used the same model except fw: of patient is 2BA30002 and donor is :2BA3001. ALSO DGM OF PATIENT IS 08/2014 AND DONOR IS :05/2014 betty

HI to all Patient DONOR Model : ST1000LM024 ST1000LM024 P/N :HN-M101MBB/AV2 SAME REV: A A F/W:2BA30002...

hi jol, I meant say same , ie up to 7 digit, i tried with 1111111 or 3333333 or 5555555 or 8888888 . Not entire sector , i did't tried. but at present one another method is going on.. that i disabled the head 1 and also i set the option in " hdd translator initilisation in RAM " and...

thank you jol, this hdd have 9 digit sector. and up to 7 digit sector ,i can access. After that it making the problem... Same like seagate hdd. this time i am adding the terminal log also. so that you can more understand my problem.. once again thank u Jol Betty elected...

dear sir, I have with Hitachi 500 GB 3.5" hdd with model:HDS5C1050CLA382 Above said hdd, which have the problem that is translator problem. As per the ACE instruction , I followed the procedure and i got the ID and capacity and everything. Now the problem is that I am not able to...

hai jared, Thank u very much .. Unfortunately that files did't work.You sent the files of WD20ezrx instead of WD10EZRX Betty

hello jared, I really not able to follow you. "Consolidated Rom Version" means what ? or where i can find out it? please share with me Is it not sufficient for the LDR/ module which i given the information ? betty

Hello To All If anybody have the said LDR please share with me betty

YES SIR WD 1 TB WD10EZRX-00DC0B0

Thank u Jared, Rom Version : 04.2QB ROM F/W VERSION: 0004002Q Overlay f/w ver: 04.2QB Servo F/W Ver: 06.0F Family : Diablo 3D thanks Please help me Betty Crystal

Hai to all, I need Firmware/LDR of the following Model Model : WD10EZRX-00DC0B0 DCM: HGRNHTJCG If anybody have the firmware plz share with me Betty crystal

Dear sir, Can u advice me for the Best & result oriented tool for Head Replacement ? As per your experience Or Any In-house tools if we can make please guide me.... Betty Crystal

Thank u to all.... I used the s/w "jihosoft "and i got the files but which are corrupted. Can it possible in Pc3000K ? I tried to add new reference and did the recovery. but files are getting, also size also showing but its not able play... ie corrupted... If u get any updates let me...

Dear All, I got one XQD card with formatted, was having video files (*.MXF). But after a lot of efforts, nothing can get from it. I open it sector view in hex, it was seems like encrypted. I use some software to recover and also i got files which can play in VLC. But all are corrupted files...

dear Jared, I am very thankful to you... , I used to follow the Donor drive guide and also do the self practice ,how did u said. It always success in same working hdd. But no success in another hdd . Still I am doing the practice and hope for the success. If any other...

Hello Sir, I would like to that , what are precautions should take ,once we change the Head Replacement. because ,when i do the head replacement ,i always used to follow the donor matching and do the replacement. But it never help me. after the replacement drive start the light sound...