WD20EZAZ-00L9GB0-Desktop HDD with "continues Power Re boot "

Don't Lose Your Data Forever!

DIY data recovery has risks. You could lose your data forever! Don't want to risk it? Talk to a professional now.

betty

Member

I have a WD 2tb Desktop HDD with "continues Power Re boot " . Model : WD20EZAZ-00L9GB0. i CHANGE THE PCB, UNLOCKED PCB, MODULES 2& 32, HEAD. Still problem persist. When Block the SA with the help of Unlock PCB , then no problem(pwr re boot) and continuous spinning and i can access the SA and modules . All modules can be read without any obstacles . In ACE , there have no proper family , but i use with "ViniceR". I think you also experienced with the same family...​


Thanks is Advance
 

Jared

Administrator
Staff member
Are you able to fully read module 190 on both copies without any issues?
 

Jared

Administrator
Staff member
I'm wondering if it might be a bad head and it's repowering when it gets to buffering from that head. Have you tried messing with the head map to disable heads?
 

betty

Member
yes i tried head map with disable heads.... ,When I block the SA, then hdd getting smooth spinning and I can access the SA
 

starparas

New member
Did you Replace the heads? i had the same problem with 4tb desktop drive with pcb number 800011. client did not pass the quotation for the head replacement and it was returned unrecovered.
 
Top