Search results

Hi everyone. Need your help with this case. The drive has bad Head 04 before and wont let Module 02 Write back to upload LDR. After swapping new heads. The drive readies, full access to SA and can read and write to SA normally. However have the Module 02 checksum error. And wont let me access to...

Is there anyone, any company still selling the tools??? Besides of HDDSurgery of course

I got a 4TB My Passport Drive from WD. That doesn't show any sign of life on the PCB. The USB connector is fine. I soldered a Sata connection to test the PCB. There is 0 amps drawn on 5v rail I wanted to know if someone could provide me with crucial measuring points, components and voltage...

What can you do if you lost your original NVRAM??? :cry::cry::cry: So i received a drive which was clicking from the start. Did a backup of NVRAM of the drive. However it is saved into Unknown folder which later i guess i overwrote it. I changed the heads. The drive is spinning without any...

For 4 years. I now have this same question/. Using PC3K

I got this 4TB WD drive in USB enclosure Too many bad sectors made it almost impossible to read in USB mode So i Soldered SATA cable instead - Unlock ROM and WROTE it back to original PCB through POGO PINS - Drive Comes Fully Ready - However after Decrypting the data table wont show up in DE -...

Yeah. I did read through his post. Need to send him the Stats/ Haven't tried this thing myself. Need a lot of Calculation as in Jared's post

I have ST1000LM035 with just the same issue. Head 0 read perfectly. The head 1 reads slow like 1-3kb/s and the data given are all the same in DE And the problem might be dead heads

I just bought one. I will try one on some laying around platters. As i know in wrist watch industries. it is able to remove hand oil. so maybe worth a try :P

I just bought one. I will try one on some laying around platters. As i know in wrist watch industries. it is able to remove hand oil. so maybe worth a try :P

WDC WD10SPZX-22Z10T1 HDD Constantly dies after swapping Heads I have this 1 TB Drive in Transcend Enclosure Model: WD10SPZX-22Z10T1 Serial: WD-WXL2E60FKTS5 Firmware: 04.01A04 Cap: 1TB When it first come to me it has Head issue. The drive spins up but makes Head clicking sound I proceed to...

Have anyone tried that blue block of rubber that those Watch makers, fixers use???

Oh! I found out that mine are Rosewood drives. So no Preamp in ROM. So how do i check headmaps???

Some questions?? Do you need the Drive to be fully functional to be able to get this Preamp??? If so, is that preamp is the current preamp of the heads inside the drive right now??? Or its the preamp from ROM (Original Heads)??? Cause i have a Rosewood A5 drive Upon clicking the "!" icon in the...

Thanks for the heads up! Jared!

Hi Jared. How can i join your Secret Section?? Want to learn more about this!!

Oh ok. Gonna take the Pinout down then. Thanks for the reply Jared

Hi everyone So i am having this Sandisk 32gb 48mb/s SD card I used Type 4 Pinout from Acelabs Solbase Got the card to ID but i think it did not id correctly It ID: 45 3e 96 93 (64gb) Which is a 64gb SD Can anyone check if i got the correct pinout??? Or can someone provide a pinout for me...

I have a small question??? So i just installed UFS Explorer on My computer. Trying to recover a file just recently deleted My computer has 2 Bitlocked partitions. That are open in Windows ( Fully accessible) Isn't UFS Explorer should be able to access those to partitions and scan them??? Upon...

Sorry for digging this up. I have this 2 clicking drives. 2 different cases. Both of them got Head Swap but got Abort Error upon Utility Initialization. Cannot ID After head swapping the Drive Spins normally. However no sounds from the heads Can the error be because of the Head compatibility...

I have these 2 drives 1. HITACHI HTS545025B9A300 250GB 2. HGST HTS721010A9E630 1TB They both were having clicking heads I changed the heads Upon turning on they got Ready And as soon as i click into any utility to ID the drives I got the Abort message What can be the cause of this problem...

Nah, sadly at this point there is no chance :(

Dead SKHynix NVME SSD Need Recovery So i got this NVME SSD that died on me recently I've searched through PC3000 Support and found out that SK controllers haven't been supported yet I think the only way to recover it is to swap NAND or whatever components that broke on it I wanted to know if...

That would be awesome. Can you PM me the details???

Hi, As the title says. I am willing to buy 2nd Hand SPIDER BOARD for PC3000 FLASH Because i feel spending 2000 Euros is to much for me but 1000+ is manageable If anyone have 1 to spare please PM me or send me an email at [email protected] Thanks!

Can someone check their data base for this particular SD card from Lexar?? SD Lexar 32Gb 800x 120mb/s Is the card Recoverable?? OR the card has LDPC and ECC?? Some pics

Got an WD250gb with this issue. The drive spins up for 4-5 times then stops. Running the PC3000 UDMA. The status stops on DRD as normal. However when trying to run the utility this happenes. Tried swaping the heads. No avail. PLS someone help Techno mode key Techno mode...

So i think what you did there is hot swaping the boards. Im currently having exact issue