Dead SKHynix NVME SSD Need Recovery

[gameboybin]

Dead SKHynix NVME SSD Need Recovery

So i got this NVME SSD that died on me recently
I've searched through PC3000 Support and found out that SK controllers haven't been supported yet

I think the only way to recover it is to swap NAND or whatever components that broke on it

I wanted to know if it is possible to do that???

Its the SK Hynix PC401 NVMe 512Gb
Main controller edged info: 88SS1093 BTB2 113N700 05JW 1812 B1P (Marvell)
https://www.guru3d.com/news-story/marvell-88ss1093-pcie-3-nvm-express-ssd-controller.html
2nd controller edged info: SK Hynix H9CCNNN8JTBL AHNUD 843A
https://www.aliexpress.com/item/1005004342002712.html
NAND chip edged info: SK Hynix H27Q2T800A3R BDG 841Y
https://www.directindustry.com/prod/hynix/product-34497-204016.html

Lots of Thanks!

 

[brunocamargo]

I HAVE THE SAME PROBLEM, DID YOU GET ANY WAY TO RECOVER THE DATA?

 

[gameboybin]

I HAVE THE SAME PROBLEM, DID YOU GET ANY WAY TO RECOVER THE DATA?

Nah, sadly at this point there is no chance