seagate ST500LT012 thin

[abedalkareem]

hi
i couldn't found any solution on internet for this case , any help will be appreciated

this drive ID correctly and show right model and serial but with ()MB capacity, N5 show's smart values but you cant clear it using N1 this error come off
Init SMART Fail
LED:000000BC FAddr:00004C51
then terminal hangs need to power reset



terminal Log:

Rst 0x10M PASS
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>/7

F3 7>X

Head 00 Resistance 0131
Head 01 Resistance 015D

F3 7>/t

F3 T>V1
User Slip Defect List
log log log phys phys
LBA span cumm cyl hd sctr zn cyl sctr SFI PBA
0 0 0 0 0 0 0 0 0 8 0
0 0 0 0 0 0 0 0 0 8 0

Head 0: entries 1 slips 0
Head 1: entries 0 slips 0
Total Entries 1 Total Slips 0

F3 T>V2
System Slip Defect List
log log log phys phys
LBA span cumm cyl hd sctr zn cyl sctr SFI PBA
0 0 0 0 0 0 0 2297F 0 FFFFFFFF 0
3E89 A07 A07 10 0 0 0 2298F 0 FFFFFFFF 4890
3F60 CC4 16CB 13 0 0 0 22992 0 FFFFFFFF 562B
28E4C 3089 4754 0 1 0 1 21CC7 0 FFFFFFFF 2D5A0
2CCD5 A07 515B 10 1 0 1 21CD7 0 FFFFFFFF 31E30
2CDAC CC4 5E1F 13 1 0 1 21CDA 0 FFFFFFFF 32BCB
51C98 3089 8EA8 A0 0 0 2 22A1F 0 FFFFFFFF 5AB40
7AAE4 4754 D5FC A0 1 0 3 21D67 0 FFFFFFFF 880E0
7AAE4 D5FC D5FC A0 1 0 3 21D67 0 FFFFFFFF 880E0

Head 0: entries 4 slips 4754
Head 1: entries 4 slips 8EA8
Total Entries 8 Total Slips D5FC

F3 T>/1

F3 1>N5
Att
Num Flgs normlzd worst raw
1 000F 64 FD 00000000000000
3 0003 64 FD 00000000000000
4 0032 64 FD 00000000000000
5 0033 64 FD 00000000000000
7 000F 64 FD 00000000000000
9 0032 64 FD 00000000000000
A 0013 64 FD 00000000000000
C 0032 64 FD 00000000000000
B8 0032 64 FD 00000000000000
BB 0032 64 FD 00000000000000
BC 0032 64 FD 00000000000000
BD 003A 64 FD 00000000000000
BE 0022 64 FD 00000080800000
BF 0032 64 FD 00000000000000
C0 0032 64 FD 00000000000007
C1 0032 64 FD 00000000000007
C2 0022 28 28 00002800000000
C4 000F 64 FD 00000000000000
C5 0012 64 FD 00000000000000
C6 0010 64 FD 00000000000000
C7 003E C8 FD 00000000000000
F0 0000 64 FD 00000000000000
F1 0000 64 FD 00000000000000
F2 0000 64 FD 00000000000000
FE 0032 64 FD 00000000000000
0 0000 0 0 00000000000000
0 0000 0 0 00000000000000
0 0000 0 0 00000000000000
0 0000 0 0 00000000000000
0 0000 0 0 00000000000000

F3 T>m0,2,2,,,,,22
SerialFmtNoiseBoost:FFFF SerialFmtSecondaryNoiseBoost:FFFF Max Wr Retries = 00, Max Rd Retries = 00, Max Iterations = 01, Max Certify Rewrite Retries = 2DF8
Ev LBA/Soft XferLen Zn Trk Hd Sct Wdg PBA ErrCode

Init SMART Fail
LED:000000BC FAddr:00004C51
LED:000000BC FAddr:00004C51
LED:000000BC FAddr:00004C51

 

[Amarbir[CDR-Labs]]

Well,
Please check smart modules or sys file and replace them with donor if possibly

 

[abedalkareem]

":hzw6bcyi][post]7988[/post] Please check smart modules or sys file and replace them with donor if possibly

Problem solved , smart system file (135.rpm) was damaged replaced with donor and some SA repairing then rebuild translator then solve () mb capacity then Got full access

thanks amarbir

 

[Amarbir[CDR-Labs]]

":1dlzhzt2][post]7988[/post] Please check smart modules or sys file and replace them with donor if possibly

Problem solved , smart system file (135.rpm) was damaged replaced with donor and some SA repairing then rebuild translator then solve () mb capacity then Got full access

thanks amarbir

Well,
You Are more then welcome brother