Hi,
today it got me too. My child played with the ON/OFF switch on the computer. Now my hard drive is not recognized either in the bios or in Windows. Hard drive is spinning up. This is what is displayed in Hyper Terminal:
Boot 0x40M
spin up
TCC-001E[0x00026F7C][0x000273E8][0x00027854]
Trans.
Rst 0x40M
MC Internal LPC Process
spin up
TCC-001E
(P) SATA reset
MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 01A1C75E
[RSRS] 070D
ProcessRWError -Read- at LBA 000000000005B38F Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000005B38F!
Reconstruction: EXCEPTION: Seg Read Fail: Status = 0000
Continuing after error
Reconstruction: Completed 1:
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
spin up
TCC-001E
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
I read the MCMT should be repaired.
But I can't access the terminal with cntr+Z. I've already tried to shot the 2 points (red and also tried yellow) on Controller socket.
Still "
LED:00000047 FAddr:FFFFFFFE
.
.
.
How can I stop the "LED:00000047 FAddr:FFFFFFFE" loop?
Need your help
Thx Detti
today it got me too. My child played with the ON/OFF switch on the computer. Now my hard drive is not recognized either in the bios or in Windows. Hard drive is spinning up. This is what is displayed in Hyper Terminal:
Boot 0x40M
spin up
TCC-001E[0x00026F7C][0x000273E8][0x00027854]
Trans.
Rst 0x40M
MC Internal LPC Process
spin up
TCC-001E
(P) SATA reset
MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 01A1C75E
[RSRS] 070D
ProcessRWError -Read- at LBA 000000000005B38F Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000005B38F!
Reconstruction: EXCEPTION: Seg Read Fail: Status = 0000
Continuing after error
Reconstruction: Completed 1:
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
spin up
TCC-001E
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
I read the MCMT should be repaired.
But I can't access the terminal with cntr+Z. I've already tried to shot the 2 points (red and also tried yellow) on Controller socket.
Still "
LED:00000047 FAddr:FFFFFFFE
.
.
.
How can I stop the "LED:00000047 FAddr:FFFFFFFE" loop?
Need your help
Thx Detti