seagate ST2000DL003

abedalkareem

abedalkareem

Member
the drive spin up and Stuck on busy tried over 100 time to short the reading channel in different timing after (Spin Up
,Rst 0x40M ,(P) SATA Reset )but no Success swapped PCB same thing , i cant apply CTRL + Z

any suggestion ?


Boot 0x40M
Spin Up[0x000246DF]
Trans.

Rst 0x40M
MC Internal LPC Process
Spin Up
(P) SATA Reset

SIM Error 1009 LBA 00000000000643FB FD FCFFF3FF
RW Error 00000080
MediaPartition:

Host LBA Length Disc LBA Length Start Cyl Head
Media Partition 00000000 00999E60 00000000 001333CC 00000000 00000000
MC 00000000 00989FC0 00000000 001313F8 00000000 00000000
MSP 00991900 00000C20 00132320 00000184 00000203 00000005
User Partition 00999E60 001333CC 000001F8 00000005

MCMainPOR: EXCEPTION: SIM aborted prior to MCMT read
MCMainPOR: EXCEPTION: POR Failed General
MCMainPOR: Feature Disabled...
SIM Error 1009 LBA 00000000000643FB FD FCFFF3FF
RW Error 00000080

MSP MainPOR:
MSP Init Metadata
Buf Bytes/VBM 00000210 DBA Base 40000000
Metadata size in bytes 0040
Num Segments 0061
Logical Sector Alignment 00000000
MSP Reconstruction
Rst 0x40M
MC Internal LPC Process
Spin Up
LED:000000BD FAddr:000058B3


20161026_114118.jpg
 
abedalkareem

abedalkareem

Member
Amarbir[CDR-Labs said:
":3ugcqj7w][post]6256[/post] Hi,
i am very sure 1 or more heads are bad in your case
Click to expand...
even if the heads are dead why I cant perform any terminal command ?? Does it correlated for this seagate model ??
 
Jared

Jared

Administrator
Staff member
I actually tend to disagree. I think that module 17A is damaged. Notice that Sim Error 1009.

That's not to say you don't have a bad head, it's certainly possible. But, you definitely have an issue with that module.

Try following this guide: http://ts.acelaboratory.com/index.php?/ ... a-sys-file

I'd also suspect there's a media cache problem from some other messages in there. So you'll want to disable that too, it's probably what's preventing terminal access. Let me know if you need remote help to handle this one.
 
Amarbir[CDR-Labs]

Amarbir[CDR-Labs]

Member
Jared":1xzqxp6c said:
I actually tend to disagree. I think that module 17A is damaged. Notice that Sim Error 1009.

That's not to say you don't have a bad head, it's certainly possible. But, you definitely have an issue with that module.

Try following this guide: http://ts.acelaboratory.com/index.php?/ ... a-sys-file

I'd also suspect there's a media cache problem from some other messages in there. So you'll want to disable that too, it's probably what's preventing terminal access. Let me know if you need remote help to handle this one.
Click to expand...


Well,
For sure Sim 1009 is a issue with 17a sys file .But the reason many times is a bad or utterly weak head .I would suggest once he is able to revive the drive he does cloning head wise and disables the head thats the weakest .I disable SMP pages in all seagates i get jared
 
You must log in or register to reply here.
Top