Seagate data recovery

[mayanksharmaggc]

Showing wrong sn number and model number and size 3.86gb

Sent from my RMX1801 using Tapatalk

 

[lcoughey]

Showing wrong sn number and model number and size 3.86gb

If the SN is wrong, someone likely swapped the PCB. You need the original ROM to have any chance to recover a Seagate.

 

[mayanksharmaggc]

Showing wrong sn number and model number and size 3.86gb

Sent from my RMX1801 using Tapatalk

If the SN is wrong, someone likely swapped the PCB. You need the original ROM to have any chance to recover a Seagate.

Sir head also making sound like tick tick
And in some seconds drive spin down
Then no movement

 

[lcoughey]

Sir head also making sound like tick tick

That is irrelevant with a drive that is showing the wrong SN. Your first step is to get the original ROM with the match SN, otherwise, everything else you do is a waste of time.

 

[mayanksharmaggc]

Sir head also making sound like tick tick

That is irrelevant with a drive that is showing the wrong SN. Your first step is to get the original ROM with the match SN, otherwise, everything else you do is a waste of time.

Sir i have a same drive with same data code and same manufacture month and year and same part number and same pcb with same revision i swapped that and same sound of head

Sent from my RMX1801 using Tapatalk

 

[lcoughey]

Sir i have a same drive with same data code and same manufacture month and year and same part number and same pcb with same revision i swapped that and same sound of head

And your point is? You are wasting everyone's time until you get a PCB with the original ROM on it. You can change the PCB and heads 1 million times, post 10 billion questions and do a rain dance, but there is absolutely nothing that will work without first getting the original ROM.

 

[mayanksharmaggc]

Sir i have a same drive with same data code and same manufacture month and year and same part number and same pcb with same revision i swapped that and same sound of head

And your point is? You are wasting everyone's time until you get a PCB with the original ROM on it. You can change the PCB and heads 1 million times, post 10 billion questions and do a rain dance, but there is absolutely nothing that will work without first getting the original ROM.

Sorry sir
But i am learning so

Sent from my RMX1801 using Tapatalk

 

[mayanksharmaggc]

And your point is? You are wasting everyone's time until you get a PCB with the original ROM on it. You can change the PCB and heads 1 million times, post 10 billion questions and do a rain dance, but there is absolutely nothing that will work without first getting the original ROM.

Sorry sir
But i am learning so

Sent from my RMX1801 using Tapatalk

Sir i have backup of original rom

Sent from my RMX1801 using Tapatalk

 

[lcoughey]

Sir i have backup of original rom

So, either connect the original PCB or write the backup of the ROM to a donor PCB, then you can go to the next step of troubleshooting.

 

[mayanksharmaggc]

Sir i have backup of original rom

So, either connect the original PCB or write the backup of the ROM to a donor PCB, then you can go to the next step of troubleshooting.

Thank you sir

Sent from my RMX1801 using Tapatalk