How to Put iPhone/iPad in DFU Mode?

[graceyin2017]

DFU (Device Firmware Upgrade) mode is regarded as the ultimate flash state that can put your iOS device into where it can interface with iTunes but does not load the iBoot (bootloader on iOS devices). It allows all devices to be restored from any state. DFU mode can help solve many ios problems and it is really easy to operate.

If you want to enter DFU mode, this post is worth reading:
[glow=red]Unauthorized Link Temporarily Removed by Admin[/glow] - hxxp://www.jihosoft.com/tips/how-to-put ... -mode.html

Hope it will be helpful for you!

 

[crystalmini]

how to put iPhone/iPad in DFU mode?
for iPhone 8/X/XR/XS:
1.Plug your iPhone X or iPhone 8 into your Mac or PC.
2.Make sure iTunes is running.
3.Turn Off your iPhone X or iPhone 8 (if it isn't already).
4.Press and hold down the On/Off button on the right side of your iPhone for 3 seconds.
5.Press and hold down the volume down button on the left side of your iPhone while still holding down the On/Off button.
6.Keep holding both buttons down for 10 seconds. (If you see the Apple logo, you've held them too long and will need to start again.)
7.Let go of the On/Off Button but keep holding the volume down button for about 5 seconds. (If you see the "Plug into iTunes" screen, then you've held it too long and will need to start again.)
8.If the screen stays black, that's it! Your iPhone should now be in DFU mode.
For iPhone 7/7 Plus:
1.Plug in your iPad or iPod touch to your Mac or Windows PC.
2.Make sure iTunes is running.
3.Turn Off your iPad or iPod touch if it isn't already.
3.1Press and hold down the On/Off button on the top of the device for 3 seconds.
3.2Swipe the slide to power off slider to the right.
4.Press and hold down the On/Off button on the top of your device for 3 seconds.
5.Press and hold down the Home button on the front of your device while still holding down the On/Off button.
6.Keep holding both buttons down for 10 seconds. (If you see the Apple logo, you've held them too long and will need to start again.)
7.Let go of the On/Off Button but keep holding the Home button for about 5 seconds. (If you see the "Plug into iTunes" screen, then you've held it too long and will need to start again.)
8.If the screen stays black, that's it! Your iPad or iPod touch should now be in DFU mode.

once you stuck on DFU mode, here can help you to get out of DFU modehttps://www.fonecope.com/iphone-stuck-on-loading-screen.html.

 

[Jared]

I'll allow the above post only because the article is somewhat informative, and it's not a company that's been banned yet for misleading SPAM (such as how Jihosoft was banned here).

 

[Shirley2060]

Just add more info for 'How to put iPhone and iPad in DFU mode' in simple words. Maybe you can have a try.

For iPad (with Home button), iPhone 6s and earlier, press and hold Home and Power buttons simultaneously for about 8 seconds. Release Power button but keep pressing the Home button until the screen turns black.

For iPhone 7 and 7 Plus, press and hold the Volume Down and Power buttons at the same time for about 8 seconds. Release Power button but keep holding the Volume Down button until the screen is black.

For iPad (without Home button), iPhone 8, X and later, press the Volume Up button and then release it quickly. Then press the Volume Down button and then release it quickly. Next hold the Power button until you see the screen become black.

 

[Lewis-H]

iPad, iPhone 6s and below, iPhone SE and iPod touch
Connect the device to a computer using a USB cable.
Hold down both the Home button and Lock button.
After 8 seconds, release the Lock button while continuing to hold down the Home button. ...
Nothing will be displayed on the screen when the device is in DFU mode.