Search results

Hdd WDC WD10TMVW-11ZSMS4 with USB PCB 2060-771761-001 ROM Size: 256KB MRT not ID but WD Marvel tools identify model and its size with USB PCB I can save modules which are in RAM (Static files ) but can't read any modules from Platters getting "SCSI error 00000000". so tried in SATA PCB...

Need Firmware Palmer WD10SDRW-11A0XS0 00500AP DOM: FEB 2022 ROM: ROM Data Size : 1024 Kb ROM version : 05.APD ROM generation : 05.APD Link table version : A3.7C ROM Firmware version : 000500AP

It can be solvable

Still unsolved?

can u send 02

the link is not working

PCB Change Solved the issue

ST1000DM010-2EP102 CC43 Terminal: Can read sysfiles without err. How to solve this with MRT

I request someone please provide firmware copy for HTS545050A7E680 F/W: GR2OA230

Server is not working now. getting this

Can Someone help me to identify TX/TX in 2060-800069-001 USB Board

Often getting this err in MRT. 2 out of 4 cases when logical head map change gives this err. when original rom written the err will gone. In that Situation used virtual boot and bypassed this err

Got This and may need for some other one

What is its family WD10SPSX-60A6WT0? Can someone Provide Firmware resource of WD10SPSX-60A6WT0 Ver. 000C Resource ?

With Donor ROM i can access user area. but sequence of some thousands sector read and large amount of sectors unreadable then some green and then large section err and so on... then why it is spin down only with PATIENT ROM? Something wrong in PATIENT ROM!!!! what is DISK_ECU_UNSAFE_ERR ?

HDD : WDC WD10EZEX-60WN4A1 F/W : 03.01A03 05.6TH FMLY : TresXLB2 TOOLS: MRT 2.1.4.1 AND WDMARVEL (LICENSE) NOT PLUS (THERE IS OPTION IN PLUS VERSION TO GET 47 FROM 40) Patient HDD spindown with original rom but spin with donor rom. modified donor rom with patient 47 then hdd spin down with...

HDD : WD10EZEX-60WN4A1 F/W : 05.6TH FMLY : Tresxlb2 Need ROM + LOADER (IF POSSIBLE FULL BACKUP)

i m having the same terminal error for ST2000LM007-1R8174-570 with EB01 (10-JUL-2019) in MRT 2141 Rst0x80M T:0x000C 0x3162FB2C FTU TCC:0021:0028 EMCDataErr:00000012 PrgF (P)SATAReset RAWOFF PASS EDACValue=00000000FFFFF111 EDACValue=00000000FFFFF111 EDACValue=00000000FFFFF111...

With original ROM giving some error in reading sysfiles (28,35,301 etc) can write via serial port at low baud rate but can't read even successfully written sysfiles. so no user area access.

HDD: ST3500418AS PATIENT S.N: 9VM1EPEN P/N: 9SL142-301 F/W: CC35 DATE CODE: 09513 SITE CODE: TK PREAMP: 59 01 LOGICAL (H.MAP) : 32 F3 DONOR S.N: 9VM2PB1V P/N: 9SL142-301 F/W: CC35 DATE CODE...

Seagate 1TB ST31000524AS with Firmware JC45. HDD is not detected. No messages in Terminal Window even Rom Boot msg. Can read and write rom via MRT without problem. Changed PCB no use. The same pcbgives terminal msg with CC4? firmware( for testing) but not with JC45. What is the problem...

Thx for the information Never touched translator and media cach. i tried to stop reallocation in sys 93 using mrt 2128, 2130, 2140 to stop Starting LBA of RW Request=000509AA90 Length=FFFFFFFF ProcessRWError -Read- at LBA 000509AA9F Sense Code=43110081 Nothing helped. so i request anyone...

Someone Please do one help i tried in MRT 2128, 2130, 2140 to patch but nothing helpfull for the following terminal output Starting LBA of RW Request=000509AA90 Length=FFFFFFFF ProcessRWError -Read- at LBA 000509AA9F Sense Code=43110081 so pls do Patch for attached sys 93 except Media...

Thats ok i need resource

Rom Attached F/W: 1.7DB

Can Someone provide Firmware resource for HDD: WD20EZRZ-00Z5HB0 F/W: 1.7DB Famly: Diablo 3S Tool: WDMarvel 3.3.1 Thankyou

I need the sysfiles backup for the ST500LT012-1DG142 F/W: 1003YAM1 Please

HDD: WD800BB-22JHA0 (05.01C05) F/W : 05.3BC(ROM) FLY : SABRE TOOL: WDMARVEL 3.3.1 I need the above firmware with full modules

Problem Solved Data Recovered

HDD: WD20PURX-64P6ZY0 Rom: 15.0BC Problem: Not Detected Tool : WDMarvel 3.3.1 1. When connected the hdd goes bsy bsy forever 2. When SA region edit then shows firmware version and model When try to load Overlay 11 then error "Error loading module ID11 into RAM, state - 0101" 3. After SA Edit...

HDD : WD800BD-08MRA1 F/W : 40.0UE Fly : Unicorn Sys : WDMarvel 3.2.1 Can someone provide firmware backup of the above hdd?

1. When pcb alone i m getting "error detecting region map ....". If i wrote someother rom i can edit region map 2. When loader 11 loaded hdd will become bsy state

is this rom is damaged?

There is no clicks and strange sound

Thx i had already downloaded it from hddguru. when module 11 loaded then hdd become bsy Any idea (using wdmarvel 3.2.1 full)

HDD Model: WD5000AZRX-00A3KB0 Family : TrailXLB (Royl) F/W ver : 01.30R System : WDMarvel 3.2.1 Can someone help me to get firmware backup of the above hdd or LDR ?

Hello guys HDD: ST2000DM002-1CH164 CC26 Can anyone help to disable auto reallocation in attached sysfile 93 Thankyou

Thanks

Please I need this loader Model WD10JMVW-11AJGS3 FAmily: FBLite Rom Version: 0016006M Thank you

In Recent seagate F3 firmware locked (Diag Port Locked) Drives labels a 32 Character PSID value is Printed. What is that PSID value? Is this have any relation to unlock those diag port? In old and normal hdd's label has no such value PSID. it is only printed in diag port locked drives...

use also hxd editor to view the sectors and note the last sector of data copied (check backward from end sector)

use dmde then active file or partition recovery( u can use the parts of images)

Here attached ROM copy? Can anyone unlock Diag Port Lock?

First thanks for all of your suggestion and recommendation. I solved this cases and taking out datas from the disk only by using the above mentioned programs ( "What a combination.." ) & .... (no other Soft and hardware) once again thanks

HyperTerminal , STCom(2013) and named Seagatetools from hpwlab

i can sent sysfile 93 can u help me by disabling everything unwanted (if possible disable smart) Note: 1. Drive comes with no label 2. I have no pc3k(My in-ability & local charges given by customer ) 3. I had read all 256 tracks without error but only mistake i read it after writing sysfile...

i tried PCB with ROM trans, now i got the sames error to read those mentioned files. but now i tried to write 28 & 35, success as previous but now i can read them back again immediately or re-powered without problems. now i need which of these sysfiles 134,135,136,137,138,139,140,143,301,306...

to recover data 1. i have already successfully recovered datas by writing sysfile 28 and 35 from donor drive then regen translator 2. same time 346 also transferred in some drives No other system files

Today i got one hdd without any label with non-detected condition i tried to read system files through terminal, from that i got the information about HDD Model: ST31000528AS with CC38 Firmware i can read many both copies of sysfiles from hdd through hyperterminal except the important...

I need Full firmware backup or at Least Loader for Model : WD20PURX-64P6ZY0 F/W : 1.5VC Family : Diablo 3S (Royl) System : WDMarvel 3.0 Full Pls for urgent need

is there any script to write back the dumped modules to the drive? i had dumped all modules from wd10tmvw-11zsms4 using hddsupertool, now i want to write them to the drive. Can anyone provide script to write all the dumped modules to the drive???

Need full firmware or loader for the hdd Model : wd3200bmvu-11a04s0 F/W : 2.06A Family : Venus (Royal USB)

Seagate HDD ST1000DM003-9YN162 F/W: CC4H is not detected by bios Terminal Log Attached here both copies of SysFile 93 IF possible provide ST1000DM003-9YN162 CC4H Firmware version SysFile 346 Also disable MCMT and reallocation in attached sysfile 93 Thx in advance

can some one post the firmware backup for WD20NMVW-11EDZS2 FW:21.3AH

Yes

Hello Experts HDD: ST31000528AS FW: CC38 PCB: 100536501 Rev: A Problem: 1. Not Detected by BIOS 2. Spin down after 11 CLICKS In Terminal Window Some times i m getting "No HOST FIS-ReadyStatusFlags 2002B001" othertime "No HOST FIS-ReadyStatusFlags 2002A185" In both situation i can read...

There is no shared folder message appear when login is anything problem in login details if so pls provide new login details

But asking smartware user password when connected through usb Native board. if connected via SATA PCB data is encrypted ( See my previous post of sector 0)

I have only WDMarvel 9.x Licensed Version the key sector 976769032 It is same as MOD 25 contents also Sector 976769048 Remaining all are zeros Pls help me how to proceed

Pls guide me how to do that ?

here Attached Modules and ROM backup Now My Problem is When connected with USB PCB (2061-701675 & INIC-1607E) it asked Smartware Password but the customer never set any password (Customer is genuine - Father in Church) here attached 25.mod (my HDD) & 25.rpm from net there are some diff. I...

Hello Everyone I needed LDR or Full Firmware for the said model to use with WDMarvel 9.x licensed version Model: WD5000BMVV-11GNSW0 ROM : 14.DAP Thx in advance

I request here pls post ST500DM002 KC48 Sysfile 346 or disable it in attached SysFile 93 Thx in advance

I need LDR and Firmware Backup for HDD Model: WD7500KMVW-11ZSMS5 F/W ver : 65.02J Family : Helios Tool : WDMarvel 9c Registered thx in advance

Thank you

thx for your reply. still required

Sorry for my silly questions 1. Can we read F3 sysfile of seagate hdd without native pcb using either HOT SWAP or SMART HOT SWAP? 2. If Yes Let me know the method with steps ( having only STCom Tool, Victoria, HyperTerminal, ZOC) Since I m asking this questions to generate ROM for F3 Drives...

Anyone know the use of this m0 command I seen this command in SysFile 318 of ST2000DL003 @ Offset 015619E0

ok thx waiting

No one interested?

Can someone modify sysfile 93 to disable everything using pc3k

Hdd size 500GB but Stored data only ~290GB

Note: Before writing sysfile 28, i tried many times m0,6,3,,,,,22 got success but hdd not detected. After replacing sysfile 28 only my goal achieved

Thx to everyone who helped me. Somehow I have managed to get Data Back 1. r028 ==> only 32KB & r028,3,1 ==> 156KB but file size is 598KB then i added bytes to get 598KB (See the attachments) and written that in copy 0 and copy 1 2. r135 ==> only 5KB but file size is 13KB. I...

Terminal log Ctrl+X returns one more thing when i tried to read r028 i m getting retry exceed error

sorry just removed the extension zip and written to hdd, now the error gone Thx for your help Mr. Jol but still not detected in Terminal V4 & V40 has no entries V80 has 6 entries further what i have to do?

pls reupload the file archive is corrupted

attached both copies of sysfile 93

Let me know how to do disable media catch with Hyper terminal or STCom tool?

Pls upload system file 346 for ST500DM002 KC45 or near ie. 346_3_0 or 346_3_1 Pls urgent i have no copy thx in advance