polykyle
Data Recovery Noob
Posts: 7
Joined: Mon May 07, 2018 10:38 am

Samsung USB to SATA PCB Compatability

Mon May 14, 2018 3:09 pm

jol wrote:does the ROM chip getting hot when powered on ?


Sorry for the delay, but yes the ROM chip does get hot on the pcb when power is being sent to it. Any thoughts? Thank you.

jol
Data Recovery Pro
Posts: 641
Joined: Thu Jan 29, 2015 11:31 pm

Samsung USB to SATA PCB Compatability

Mon May 14, 2018 6:23 pm

polykyle wrote:but yes the ROM chip does get hot on the pcb when power is being sent to it. Any thoughts?

then there is short there
remove it
remove excess solder if needed
use a bit flux
put it place
use a hot air gun (DO NOT PRESS IT DOWN, the short was caused by pressing it down)

smartx21
Data Recovery Noob
Posts: 1
Joined: Tue Jul 10, 2018 11:02 pm

Samsung USB to SATA PCB Compatability

Tue Jul 10, 2018 11:12 pm

Hi!
I've got the exactly same situation. USB drive spins but is not detected (led doesn't light). It seems there's something hot on the board, near the connector. Board number is 100760718 REV. C, drive is an Seagate ST1000LM025 PN: HN-M101ABB/ESA 1TB F/W: 2BA30003 from 05/2016. I'm in search for a SATA replacement board. I've got some Samsung ST1000LM024 drives, and tomorrow will try to find the so wanted 100720903 board.
Thanks for any help.
Regards,
Max (Brazil).

User avatar
pclab
Forum Moderator
Posts: 1570
Joined: Tue Jan 13, 2015 4:55 pm
Contact: Website Facebook

Samsung USB to SATA PCB Compatability

Wed Jul 11, 2018 3:46 am

And when it spins, does it make any noises?
www.pclab.com.pt
facebook.com/PCLAB.Assistencia.Tecnica

User avatar
Bankole Oladoja
Experienced DR Tech
Posts: 322
Joined: Tue Jan 13, 2015 11:24 am
Location: Nigeria
Contact: Website Facebook Skype

Samsung USB to SATA PCB Compatability

Wed Jul 11, 2018 11:16 pm

BF41-00282A --->BF41-00249B, this only works for me after transfering the Marvel Chip..
Oladoja Bankole
Exclusive Data Recovery Lab. EDARLAB
Abuja, Nigeria.
http://www.edarlab.com
Tel: 08032419528

User avatar
Jared
Forum Admin
Posts: 3450
Joined: Mon Jan 12, 2015 12:32 pm
Location: Providence, RI
Contact: Website Facebook Twitter Skype YouTube Google+

Samsung USB to SATA PCB Compatability

Thu Jul 12, 2018 10:07 am

That's probably due to a difference in firmware version.

User avatar
adrianf25
Data Recovery Noob
Posts: 11
Joined: Thu Aug 18, 2016 2:58 pm
Location: Argentina
Contact: Website

Samsung USB to SATA PCB Compatability

Sat Aug 18, 2018 10:08 am

Hello

BF41-00311A --> BF41-00315A

I've tested it and it's working.

Best Regards
Adrian from RecuperoDatos.com
Attachments
00161-PCB.jpg
1552-PCB.jpg

User avatar
Jared
Forum Admin
Posts: 3450
Joined: Mon Jan 12, 2015 12:32 pm
Location: Providence, RI
Contact: Website Facebook Twitter Skype YouTube Google+

Samsung USB to SATA PCB Compatability

Tue Aug 21, 2018 7:59 pm

adrianf25 wrote:Hello

BF41-00311A --> BF41-00315A

I've tested it and it's working.

Best Regards
Adrian from RecuperoDatos.com


Thanks! List updated. :D

User avatar
vijayan
Data Recovery Noob
Posts: 23
Joined: Sat Oct 08, 2016 1:41 pm
Location: Ram Infotech Data Recovery No 102 Lb Road Adyar,chennai
Contact: Website Facebook

Samsung USB to SATA PCB Compatability

Fri Oct 05, 2018 12:50 pm

Jared wrote:Source of the post BF41-00282A --->BF41-00249B



Model : SAMSUNG HM502JX
Serial : 33851F14AAGZ6Q
Firmware : 2AC101C4
Capacity : 500 GB (976 773 168)

BF41-00282A --->BF41-00249B

THIS OLD PCB USB TYBE SATA PCB CONVERTED BUT THIS TYBE NO ROM IC MICROCONTROLLER REPLACED AFTER WORKING

THANK YOU ----DATA MEDICS
Attachments
3.JPG
RAM INFOTECH DATA RECOVERY
NO 102 LB ROAD ADYAR CHENNAI
TAMIL NADU
CALL 9841983643/46
http://www.raminfotechdatarecovery.com

User avatar
DigitalVeriKurtarma
Data Recovery Novice
Posts: 51
Joined: Tue Jan 08, 2019 2:19 pm

Samsung USB to SATA PCB Compatability

Fri May 17, 2019 4:05 pm

I have same issue

Patient HM502JX/VPK BF41 00282A 00 usb Korea
Donor Hm500JI BF41 00294B 02 Sata China

Patient had water damaged. Clicking nonstop. PCB light working. But It's usb PCB. I am not sure about is PCB still good .
I couldn't get ROM .There is no external Rom chip. Tried to line Sata connector (removed 4 capacitors ). tried to RX TX point to read. But couldn't.


So I have 2 question.

1)Is that PCB compatible . Is this drive has unique ROM ? Do I have to read ROM from patient.
2) Is it compatible for head swap. (I guess % 25 )

Thanks.
Data Recovery In Turkey
[url]DigitalVeriKurtarma.com[/url]

Return to “Samsung Data Recovery”

Who is online

Users browsing this forum: No registered users and 0 guests