Hello.
I'm working on this station now.
Did a head change because I thought that was the problem ..
But I get the same result afterwards.
Anyone know what I can do next? (Photos attached)
Hello.
I have a western digital HDD that I am working on now.
I have physically cut head 2 due to a large circular scraper.
But when I try to upload the loader, I get this error (see photos)
Does that mean other heads can be dead too? or something else?
I tried and inspected the heads under a...
if you your PCB don't have ROM chip on U12 i guess the rom is built in on the main controller chip
I guess you can use Dolphin data lab FRP software to back up the ROM from the patient's PCB if it's not shorted.
It should also be possible to write ROM back to the donor PCB.
But I do not quite...
Hello.
I work on a poor surface ocean (Bacall)
The surface of head 1 is in poor condition ...
I was able to make an SA backup and then my head died ..
I inspected the head under the microscope and saw that it was full of crap ..
So I cut the head, but after that I found out that both Bacall...
Hello.
I tried unscrewing the screw that stabilizes the plate / center screw, but some of them will not loosen it seems to be glued. I use T8 from ifixit toolbox ..
Any tips? (the screw may be rounded now: /) :?: :?: