Hitachi 500 GB 3.5" hdd with model:HDS5C1050CLA382

dear sir,
I have with Hitachi 500 GB 3.5" hdd with model:HDS5C1050CLA382
Above said hdd, which have the problem that is translator problem. As per the ACE instruction , I followed the procedure and i got the ID and capacity and everything. Now the problem is that I am not able to access full capacity . Some after sector it showing "UNC error" . Also i notice in terminal , when i upload "PSHT" in RAM, showing "address of translator activation flag is not found" message .

Can i get some help ....

Betty
Crystal

Test : HDD Translator initialization in RAM
PSHT: C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\Hitachi HDS5C1050CLA382-JC2OA3MA-JC0511JQ1TWYAH(TESTING)\Data\SABackup\Modules\Copy_1\~PSHT.rpm
Loading PSHT...
Searching of Translator activation flag address...
Address of translator activation flag is not found!
Completed

have you eliminate head problem ?

thank you jol,

this hdd have 9 digit sector. and up to 7 digit sector ,i can access. After that it making the problem... Same like seagate hdd.

this time i am adding the terminal log also. so that you can more understand my problem..

once again thank u Jol

Betty


elected family......................... : 5C10CLA3
Model by ID............................. : Hitachi HDS5C1050CLA382

Techno mode key......................... : Ok

Loading modules table................................................. : Ok
Loading the table of "open" modules................................... : Ok


Test : HDD resources backup
Folder: C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\Hitachi HDS5C1050CLA382-JC2OA3MA-JC0511JQ1TWYAH(TESTING)\Data\SABackup\


ROM reading............................. : Ok
Reading ROM to file (ROM\ROM.bin)..................................... : Ok

Reading NV-RAM to file (NV-RAM\...)...
NV-RAM.nvr...
NV-RAM_0.nvr...
NV-RAM_1.nvr...
NV-RAM_2.nvr...
NV-RAM_3.nvr...
NV-RAM_4.nvr...
Reading NV-RAM to file (NV-RAM\...)................................... : Ok

Off-line start resources
Main modules table.................................................... : Ok
"Open" modules table.................................................. : Ok

Reading modules to profile folder
Folder: C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\Hitachi HDS5C1050CLA382-JC2OA3MA-JC0511JQ1TWYAH(TESTING)\Data\SABackup\Modules\

Module RPSH Copy 0...................... : Ok
Module RPSH Copy 1...................... : Ok
Module USAG Copy 0...................... : Ok
Module USAG Copy 1...................... : Ok
Module RAMI Copy 0...................... : Ok
Module RAMI Copy 1...................... : Ok
Module RAM0 Copy 0...................... : Ok
Module RAM0 Copy 1...................... : Ok
Module PSHT Copy 0...................... : Ok
Module PSHT Copy 1...................... : Ok
Module RDMT Copy 0...................... : Ok
Module RDMT Copy 1...................... : Ok
Module RPOP Copy 0...................... : Ok
Module RPOP Copy 1...................... : Ok
Module SECI Copy 0...................... : Ok
Module SECI Copy 1...................... : Ok
Module ALTT Copy 0...................... : Ok
Module ALTT Copy 1...................... : Ok
Module ZONE Copy 0...................... : Ok
Module ZONE Copy 1...................... : Ok
Module SRVP Copy 0...................... : Ok
Module SRVP Copy 1...................... : Ok
Module SRVM Copy 0...................... : Ok
Module SRVM Copy 1...................... : Ok
Module CHNM Copy 0...................... : Ok
Module CHNM Copy 1...................... : Ok
Module IDNT Copy 0...................... : Ok
Module IDNT Copy 1...................... : Ok
Module SMRT Copy 0...................... : Ok
Module SMRT Copy 1...................... : Ok
Module SERL Copy 0...................... : Ok
Module SERL Copy 1...................... : Ok
Module IOPS Copy 0...................... : Ok
Module IOPS Copy 1...................... : Ok
Module SSLD Copy 0...................... : Ok
Module SSLD Copy 1...................... : Ok
Module SCTH Copy 0...................... : Ok
Module SCTH Copy 1...................... : Ok
Module FEAT Copy 0...................... : Ok
Error startintg command: Reading SA [0x3F0101202, 0x8]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101202, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101203, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101204, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101205, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101206, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101207, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101208, 0x1]
Device error detected (UNC)
Error startintg command: Reading SA [0x3F0101209, 0x1]
Device error detected (UNC)
Module FEAT Copy 1...................... : Ok
Module CNFG Copy 0...................... : Ok
Module CNFG Copy 1...................... : Ok
Module WWNM Copy 0...................... : Ok
Module WWNM Copy 1...................... : Ok
Module SPTR Copy 0...................... : Ok
Module SPTR Copy 1...................... : Ok
Module PID1............................. : Ok
Module PID2............................. : Ok
Module PIDM............................. : Ok
Module MFGP............................. : Ok
Module MFGT............................. : Ok
Module DMP1............................. : Ok
Module SDM1............................. : Ok
Module SVLG............................. : Ok
Modules reading completed
Saving modules by copies.............................................. : Ok

Saving SA report to file SAReport_0_1.txt

...



Module checking
Error................................................................. : Error loading module FEAT: invalid ID (Þ­Þ­)
Loading : FEAT, ...................................................... : Error


...

Reading modules to profile folder (composite)
Folder: C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\Hitachi HDS5C1050CLA382-JC2OA3MA-JC0511JQ1TWYAH(TESTING)\Data\SABackup\Modules\

Module RPSH............................. : Ok
Module USAG............................. : Ok
Module RAMI............................. : Ok
Module RAM0............................. : Ok
Module PSHT............................. : Ok
Module RDMT............................. : Ok
Module RPOP............................. : Ok
Module SECI............................. : Ok
Module ALTT............................. : Ok
Module ZONE............................. : Ok
Module SRVP............................. : Ok
Module SRVM............................. : Ok
Module CHNM............................. : Ok
Module IDNT............................. : Ok
Module SMRT............................. : Ok
Module SERL............................. : Ok
Module IOPS............................. : Ok
Module SSLD............................. : Ok
Module SCTH............................. : Ok
Module FEAT............................. : Ok
Module CNFG............................. : Ok
Module WWNM............................. : Ok
Module SPTR............................. : Ok
Module PID1............................. : Ok
Module PID2............................. : Ok
Module PIDM............................. : Ok
Module MFGP............................. : Ok
Module MFGT............................. : Ok
Module DMP1............................. : Ok
Module SDM1............................. : Ok
Module SVLG............................. : Ok
Modules reading completed
Saving modules (composite)............................................ : Ok

Backup of service information completed




Test : HDD Translator initialization in RAM
PSHT: C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\HITACHI-IBM-ARM\5C10CLA3\Hitachi HDS5C1050CLA382-JC2OA3MA-JC0511JQ1TWYAH(TESTING)\Data\SABackup\Modules\Copy_1\~PSHT.rpm
Loading PSHT...
Searching of Translator activation flag address...
Address of translator activation flag is not found!
Completed

betty":8s6mird0 said:

[post]4716[/post]and up to 7 digit sector ,i can access.

Click to expand...

1. what do you mean up to 7 digits ? is it up to 999,999 sec. or 9,999,999 sec ?
2. up to 7 digits can you read each & every sec. ? I.e. have you imaged from sec. 0 til 7 digits ?

hi jol,
I meant say same , ie up to 7 digit, i tried with 1111111 or 3333333 or 5555555 or 8888888 . Not entire sector , i did't tried. but at present one another method is going on.. that i disabled the head 1 and also i set the option in " hdd translator initilisation in RAM " and doing the sector imaging. So now i can access the upto the last sector.( sorry, last sector is on head 1) . Once the imaging is complete, wil let you know .

Betty
crystal

This was the question in the first place

jol":nj1ad5el said:

[post]4715[/post] have you eliminate head problem ?

Click to expand...