Page 1 of 1

ApexToolLab catalog

Posted: Wed Jan 10, 2018 9:59 am
by ApexToolLab
Dear colleagues! Glad to present you our catalog: https://apextoollab.com/search
It's beta version. Now WD is completed on 90%, Seagate 60%. We will try to complete it as soon as possible.
Also you can use it like Hdd family identifier.

If you have some comments or suggestions write please.

ApexToolLab catalog

Posted: Wed Jan 10, 2018 10:22 am
by Amarbir[CDR-Labs]
Well,
i searched for ST500DM002 this showed the following also -> https://apextoollab.com/c_type/sea_11es2lp_4.html are you sure this tool works on this please

ApexToolLab catalog

Posted: Wed Jan 10, 2018 11:26 am
by LarrySabo
Cool! Thanks Andrey!

ApexToolLab catalog

Posted: Wed Jan 10, 2018 11:35 am
by ApexToolLab
Amarbir[CDR-Labs] wrote:Well,
i searched for ST500DM002 this showed the following also -> https://apextoollab.com/c_type/sea_11es2lp_4.html are you sure this tool works on this please

Now the searcher works only with family. You need to compare quantity of platters and choose a tool. In your case SEA 9/10/11/12 1
When DB will be completed there will be shown platters suitability.

ApexToolLab catalog

Posted: Wed Jan 10, 2018 12:26 pm
by Amarbir[CDR-Labs]
ApexToolLab wrote:
Amarbir[CDR-Labs] wrote:Well,
i searched for ST500DM002 this showed the following also -> https://apextoollab.com/c_type/sea_11es2lp_4.html are you sure this tool works on this please

Now the searcher works only with family. You need to compare quantity of platters and choose a tool. In your case SEA 9/10/11/12 1
When DB will be completed there will be shown platters suitability.


Well,
if i have understood your reply i take the answer as NO right .

ApexToolLab catalog

Posted: Thu Jan 11, 2018 10:33 am
by ApexToolLab
Amarbir, https://apextoollab.com/c_type/sea_11es2lp_4.html doesn't fit for ST500DM002