Cross-Compatible PCB Numbers (SATA - SATA)

Jared

Administrator
Staff member
So I'm starting this sticky to keep track of SATA PCBs that are cross-compatible with other SATA PCBs. Might come in handy when you get that rush job and it's the one PCB you don't have in your stock at the moment.

771959 & 771960 (confirmed)

If you have others, please feel free to contribute below and I'll update the list.
Thanks!

If you're looking for SATA PCB's to replace USB ones you should be looking here instead: USB / SATA Compatibility
 

Jared

Administrator
Staff member
Fixed it. Thanks!

I would bet you could add 771961 and possibly even 771939 and 771931 to that same grouping of compatible PCBs. Those are all compatible with some of the same USB boards so probably are compatible with each other as well. I've actually found that the 771959 board has the most cross compatibility with USB drives of any other.
 
Jared":38z3nl1z said:
Fixed it. Thanks!

I would bet you could add 771961 and possibly even 771939 and 771931 to that same grouping of compatible PCBs. Those are all compatible with some of the same USB boards so probably are compatible with each other as well. I've actually found that the 771959 board has the most cross compatibility with USB drives of any other.


I'll check my stock. If I had that PCB'S I'll try it.
I have a Toshiba usb to Sata convert job now. Thanks for other topic. G3448A USB to G003235C SATA . Working fine.
I tried a garbage hdd. It works now. My customer wait me to his hdd recover same way. After then I ll check.
 

Jared

Administrator
Staff member
DigitalVeriKurtarma":2iflfxri said:
Seagate PCB match

100535537 rev c
100536501 rev A

Tested 2 couple PCB . Working

Thanks guys, but please keep in mind you're in the WD section of the forum here. Other brands should not be posted here on this thread, but rather we can create threads on the other sections. Keeping this forum organized is a big priority to me. It's what I always hated about HDDGuru.

I'll start sticky topics in the other sections and move these posts there.
 

Jared

Administrator
Staff member
DigitalVeriKurtarma":1hc7qo1l said:
Apologies. I didn't recognized that.

No worries, I already moved the posts and created new sticky topics for those brands.
 
Top