Toshiba USB to SATA Guide

Jared

Administrator
Staff member
pijomax":2f1zj7kc said:
Hi everybody,

any idea for G0039A?

I have a MQ04UBD200 and need to adapt a SATA card - or find a compatible one.

Thanks in advance

Max

I'd bet it's PCB G4311A.
 

diditer

New member
FAsTec":3r5g2u5e said:
Seeking for the board
G3959A --------> G3918A

I have found this Toshiba SATA board
S50058

check it on Aliexpress https://bit.ly/2FnsiS3

same processor , same spindle/heads controller

Did it work the S50058 board?. I think this one is a good candidate to replace the G3918A board but I need to confirm this.
 

ravideep

New member
Hi guys, I need some help. I want to recover data from MQ01UBD100 (heads banging/ clicking) and it's G003250A. I have replaced the head from donor drive MQ01ABD075 (G003138A) but the new head is still making sound and doesn't recognise. I then put the head back in donor drive and it starting clicking there as well.

May I know if replacing head only won't be a solution? or am I missing any other step here?

Thank you in advance
 

Jared

Administrator
Staff member
Most likely you ruined the new heads. Unless you know what you're doing, that's pretty much always going to happen.
 
Top