WDC WD5000LMVW-11VEDS0 module 2 error

[Freakazoid]

Hello. im working on a WD wd5000lmvw and when im trying to upload dir into ram i got error on modul 2

Pictures attatch.

Any advice for moving on..

 

[pclab]

Have you tried to load the loader and read the 02 from the SA?

 

[Freakazoid]

[post]15457[/post] Have you tried to load the loader and read the 02 from the SA?

Thanks for replay pclab. After some more inspection i guess the head is dead. i will check if i have any donor for head swap

 

[pclab]

Even with one bad head, doing a headmap to 00 or 11 it could eventually access SA and data. Of course it will be partial..

 

[Freakazoid]

[post]15462[/post] Even with one bad head, doing a headmap to 00 or 11 it could eventually access SA and data. Of course it will be partial..

i have already cutted off head 1. there is a big big scratch on top surface

 

[pclab]

And the bottom surface? Have you checked it too?

 

[Freakazoid]

[post]15469[/post] And the bottom surface? Have you checked it too?

Bottom surface looking ok.