Freakazoid
Member
Is it not possible to edit the head map on this ST31000528AS drive? if I set ROM physical head maps from 00 01 02 03 to 00 00 00 00
and same on ROM logical head map and edit SAP control flags max head to 0, then the hard drive will not start spinning (it behaves as if the circuit board is shorted but at the same time it gives the error message in terminal: Bad CRC Seg: 0x05
Bad CRC Seg: 0x24Bogus ISR
CPSR = 0x200000D2
R14 = 0x00001CFC
Im using Pc3000
(at least one of the heads is defective. what I'm trying to figure out is if head 0 still works
(this is my own hard drive for exploration only))
(((I was able to do it on another ST31000528AS why is it posibal only on some and not all of them)))
and same on ROM logical head map and edit SAP control flags max head to 0, then the hard drive will not start spinning (it behaves as if the circuit board is shorted but at the same time it gives the error message in terminal: Bad CRC Seg: 0x05
Bad CRC Seg: 0x24Bogus ISR
CPSR = 0x200000D2
R14 = 0x00001CFC
Im using Pc3000
(at least one of the heads is defective. what I'm trying to figure out is if head 0 still works
(this is my own hard drive for exploration only))
(((I was able to do it on another ST31000528AS why is it posibal only on some and not all of them)))