I hv one 2tb Seag Desktop hdd family :Grenada , smooth spinning, module can access... But no ID and Capacity....i remove the background proccess from 93h... no luck...
I tried to translator regen ,after taking and imp system files... , but not completing the trans regen .. it giving the following error
F3 T>m0,6,2,,,,,22
LED:00000067 FAddr:003E0546
Rst 0x40M
Spin Up
SpinOK
LED:00000067 FAddr:003E0546
LED:00000067 FAddr:003E0546
Also i tried one more command in terminal " m0,6,3,,,,,22" here the process was completed . but even no ID & capacity...
F3 T>V40
DiagError 00000007
DiagError 00000007
Invalid Diag Cmd Parameter
Any one have same experience , please give guidance ..
I tried to translator regen ,after taking and imp system files... , but not completing the trans regen .. it giving the following error
F3 T>m0,6,2,,,,,22
LED:00000067 FAddr:003E0546
Rst 0x40M
Spin Up
SpinOK
LED:00000067 FAddr:003E0546
LED:00000067 FAddr:003E0546
Also i tried one more command in terminal " m0,6,3,,,,,22" here the process was completed . but even no ID & capacity...
F3 T>V40
DiagError 00000007
DiagError 00000007
Invalid Diag Cmd Parameter
Any one have same experience , please give guidance ..