WDC WD20EZRZ-00Z5HB0 with Error "CA FLUSH ALL GOT CANCELED""

[betty]

Hi to all

I have WD 2tb Desktop HDD with ID& Capacity . But the terminal shows the following message. due to the error i am not able to access the sector


Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

Zone allocation table................... : Ok
SA SPT.................................. : 1740

ROM:
Read ROM................................ : HDDs ROM reading error Data request error - Device Error Detected: "CA FLUSH ALL GOT CANCELED"

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : CA FLUSH ALL GOT CANCELED
SA dir reading (ABA/CHS)................ : No S/A regions info avalable
SA Access............................... : NONE

Configuration reading................... : Module 02 not found


Can Anybody tell the meaning of " CA FLUSH ALL GOT CANCELED" AND what is reason behind Also I changed the PCB , but result is same

Betty

 

[Jared]

Perhaps PCLab could help you with this one. I see he's faced the same issue on this thread: http://forum.acelaboratory.com/viewtopic.php?t=8961

 

[Jared]

Actually, it looks like he did solve it: wdc-wd5000lmvw-11veds3-t1392.html

Seems in his case it was a PCB failure. Perhaps you've got two bad PCBs? Or maybe a corrupted ROM.

 

[pclab]

Yeap, my case was a bad PCB.