Bankole Oladoja
Member
Hello Guys
I have this Hitachi with dead PCB, so I got a new donor PCB, did ROM transfer.
When connected to PC3000, it gets ready instantly, then I manually selected the family. Then the following errors shown up,
Loading data for correction of HDD family handling settings from section MEM_P
Loading data for correction of HDD family handling settings from section HTS7232L9
Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>
Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok
Module not read (RESF)
Error : Device error detected (ABR)
Loading modules table................................................. : Error
Error : .............................................................. : Module not read (RESF)
Error : Device error detected (ABR)
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module ZONE is not found!
Syncro call exception "Module storage : module RESF Copy 1 not found!"
Module is not loaded (RESF, Main module table)
don't understand the errors..
I have this Hitachi with dead PCB, so I got a new donor PCB, did ROM transfer.
When connected to PC3000, it gets ready instantly, then I manually selected the family. Then the following errors shown up,
Loading data for correction of HDD family handling settings from section MEM_P
Loading data for correction of HDD family handling settings from section HTS7232L9
Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>
Techno mode key......................... : Ok
NV-RAM reading.......................... : Ok
Module not read (RESF)
Error : Device error detected (ABR)
Loading modules table................................................. : Error
Error : .............................................................. : Module not read (RESF)
Error : Device error detected (ABR)
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module ZONE is not found!
Syncro call exception "Module storage : module RESF Copy 1 not found!"
Module is not loaded (RESF, Main module table)
don't understand the errors..