ST2000DM001

abedalkareem

abedalkareem

Member
Hello all

I have a seagate barracuda 2 TB
Model : ST2000DM001
Family : 58 , gernada

the head looks fine , few bad sectors , the problem is the imaging speed is to slow less than 1MB/Sec
i am using pc3000 UDMA
any one have an idea what could be the problem ??

thanks




HDD family detecting...


Family ID: 58
Selected family......................... : 58, Grenada
Model by ID............................. : ST2000DM001-1CH164

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...

Requesting FW Pkg ver ........ GPG17C.CCD4.AA3P00.CC43


Detecting Phys Sct Size...
Result.................................. : 4096

Detecting Max Head number...
Phys. heads............................. : 5

Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)

LBA alignment........................... : 0

Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...

Media Cache
===========
MC : enabled
MC Size : 0x43F8D8
MCMT Ver : MCMTV05

Collecting Sys Files information...
ID Len
===============
0 36 Reserved Defect Table (SA defect table)
1 2 Drive Information File (DIF)
2 16 Performance Parameter File (PPF)
3 7782 Primary Defect File (P-List))
5 4 Manufacturing Information File (MIF)
8 4800
B 1000
C 122880 Serial Port Test Results File (Self Scan Log)
D 160
E 432 Data Integrity Check (DIC), HEAD 0
F 223 DIC Dummy File
13 8 Disc Registry File (settings, security, etc)
15 100 BGMS File (Directed Offline Scan)
16 2
17 40
19 24 Log File
1A 33 Log File
1B 1 Log File
1C 9
1D 128 Physical Overlay File 0
1E 128 Physical Overlay File 1
22 80 Drive Self Test (DST), Head 0
23 80 Drive Self Test (DST), Head 1
24 80 Drive Self Test (DST), Head 2
25 80 Drive Self Test (DST), Head 3
26 80 Drive Self Test (DST), Head 4
2A 9 Saved Mode Pages (HDD settings)
2B 10118 R/W Operating Parameters (translator, etc)
2C 432 Data Integrity Check (DIC), HEAD 1
2D 432 Data Integrity Check (DIC), HEAD 2
2E 432 Data Integrity Check (DIC), HEAD 3
2F 432 Data Integrity Check (DIC), HEAD 4
33 4576
34 640 Packed CONGEN XML definition
39 8192
3A 4
3D 3072
3E 3072
3F 4576
40 7
41 2180
42 4096
43 10241
44 1130860
46 226172
47 226172
48 226172
49 226172
4A 226172
4B 8192
Collecting Sys File Infos completed

Collecting DT Infos...
ROM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
A 25CB30 1024 Seek Profile
13 40128E30 1440 Dependent Zone Table for User Area
14 401293D0 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
1D 40030220 424 VBAR Configuration File
1E 400305B8 4016 Zone Format Parameters File
26 40126960 9424
27 40126768 504

RAM:
ID MemOffs Len
===========================
0 40030200 40944 Read Adaptive Parameters File (RAP)
1 40030000 512 Controller Adaptive Parameters File (CAP)
2 400303C8 496 Zone Table
4 1D400 7168 Servo Adaptive Parameter File (SAP)
40002000 13288
total 20456
5 6C000 81920 Servo Firmware Table
6 CFBC40 81964 Servo Flaw Table
A 25CB30 1024 Seek Profile
13 40128E30 1440 Dependent Zone Table for User Area
14 401293D0 120 Dependent Zone Table for System Area
15 0 524288 Flash ROM
16 40030200 32 Drive Configuration Table
17 400319A0 2016 Temperature Control Configuration
1D 40030220 424 VBAR Configuration File
1E 400305B8 4016 Zone Format Parameters File
1F 4032C8B8 4500 RW working user preamp table
20 4032DA50 150 RW working system preamp table
26 40126960 9424
27 40126768 504

Collecting DT Infos completed


Reading autotuning buffer............... Ok
Searching module table in RAM... ....... Ok
Searching volume 3 file table in RAM.... Ok
Searching volume 0 file table in RAM.... Ok
Searching SMP RAM FID in RAM............ Ok
Searching Non Resident G-List FID in RAM Ok
Searching CFW OVL FID in RAM............ Ok
Searching DT table(RAM, WR) in RAM...... Ok
Searching DT table(RAM, RD) in RAM...... Ok

System Files I/O method detection... ATA(direct)



Test : Edit HDD ID
Obtaining Saved Mode Pages File information...
Reading Saved Mode Pages...
Parsing Saved Mode Pages...
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)
Obtaining Registry File information...
Reading Registry File...
Parsing Registry File...
Writing Saved Mode Pages...
HDD power supply switching OFF/ON...
 
pclab

pclab

Moderator
Do you have to image the whole drive?
Maybe if you just get the files you need, using DE, you can get the data without messing with the HDD.
 
abedalkareem

abedalkareem

Member
yes sure but at that speed less than 1MB will take at least 5 days , i post the problem to just if some one know it can be speed up maybe buffer issue or any hint may help
 
Jared

Jared

Administrator
Staff member
Have you gone it to the "Edit Drive ID" menu and disable everything such as auto reallocation? Also you can try clearing defects list and SMART to see if that's the issue.

Also it could be an issue with the PCB, never hurts to rule that out.
 
You must log in or register to reply here.
Top