Search results

Well, How ?

Hi, Platter Looks Clean ,Still Clean it Once Then Try ,I will Work

Well, Another One From CDRLabs WDC WD10EZEX-00BBHA0 " TresUL " Not Supported In PC3K 7.0.32 Ver 7.1 No Idea

Sir , What ROM Version is this

Hello, I see they have added this feature in " Work With Flash ROM Image File " , But i do not know how to use this .I am on version 6.9.16 ,Is this the last built you folks are using

Hello, Jared Boss G0039A -> G4311A "Confirmed "

Well, Your Problem is Still not solved ,If you could give more details and terminal data might be we guys could help

Well, One Pass with ZERO "00" is more then enough ,not 7 , 7 are not required

Hello , I Plan To Tryout Latest Version Soon And Post Some Observations And Results

Hello, Whats Your Question ?

Well, Knowledge is a factor that should not be ignored ,Its not cool to keep experimenting with eyes closed ,To match a SATA pcb to a USB PCB , MCU " Micro-controller " and Motor Controller Should Be Same ,How Can you just stuff 771959/771960 to a 771801 this is suicide killing the...

Sir , Its Best To Use PC 3000 As Primary Tool An Then Get The Drive Going And Use Your Secondary Tools . I Am Currently Equipped With 19 Channels For Working With Tools Overall If i Do Not Add My Rapidspar To List Or 20 In Grand Total .I Really Liked The Way Brian Worked In His Latest...

Well, Go And Do Little Homework ,Often The Last Digit In The Version in ROM And Mod 11 Is Different ,Check a Few Drives

Hi, No Boss Its a Proper Tool ,But Mostly Chinese

Hello , How About A Status Bar At The Down of The Software Were The Total Progress is Reported ...

Hi Jared , How About a Photo Of Every PCB So That Its a Little Easier

Hi, I Will Look Into This Possibility And I Am Aware Its Possible Even Before Mr Larry Suggested ,Its Great To Buy a Laptop With Dedicated Esata Port

Hi Maximus , I Am Currently Home These Days Recovering FRom My Illness And Have a Modest Setup Here For Doing Recoveries .I Would Be Trying Out The Tool . I Have The Following For Work AT My Place 1 : A ASUS High End Ultrabok With 3 USB 3.0 Ports 2 : Vantec Dual Bay USB 3.0 Dock 3 : DFL...

Hello , I Have a NAS Here For Recovery That Has These Drives Seagate " ST6000NM0115-1YZ110 " . Does Anyone Know What Drive Family In Different Tools They Are ? .

Well, The Method is Simple ,View The ROM Find Our What Version ,Find Similiar Resource ROM ,Transfer NVRAM Segment From Patient To Donor ,Try ,If there was a code currupt in patient rom this will work ,If it does not work then NVRAM segment is currupt ,WE Have To Focus on That Then ,Sergey...

Well, I Find UFS Explorer a Very Tough Software To Operate

:D :D :D :D

Hi, More or less your data is there asi i can see ,Please tell us what find of files you are looking .Secondly whatever tool you use try complete image scan and that should find the files even if the MBR has wrong info and overlapped partitions as you said ,Try Getdataback Simple Ver 5.01...

Hi Jared , I am Well Aware Of The Boards Info You Gave ,But i Could Not Understand The The First Portion Of Your Comment .I Have More To Add To This Thread Soon ,I am Sure You All Will Also Pour In Your Observations

Hi, Confirmed Its Apollo

Hi, MRT Ultra is a great Tool ,I Have MRT Ultra X 1 And MRT Express X 2 As Far As This Brand Of Tools Is Concerned

Well, I Disagree ,He Might Be Playing With These Since Ages Does Not Mean It Cannot Be Done ,

Sure , Now You Have To Take a High Resolution XRAY of This Device .Then Figure Out The Path Of Voltages To The NAND And Cut/Isolate Them .Once Done You Have To Check If VCC And GND Are Still Short In NAND .If Yes NAND Is Fried " Go To Your Honeymoon Again But Choose A Different...

Hi Thanks , Do You Have Any Expert Inputs For My Questions I Posted In The Last ,You Guys Do Great Recoveries

Hello , I do not know how many of you here are aware i was very very sick and in a hospital for approx 2 weeks .I am in recovery mode now and i though i spend this time doing something new and productive .I Wanted to share my little research i am doing in Western Digital 4TB Right Now...

Hi, You Need To ADD WD40PURZ-85TTDY0 . I Think This is Apollo

Well, Thats what i said work on That POS 3TB first ,If you can make that work and clone it then we bother of al these ,The creater of UFS is great i can talk to him to help you incase you are interested but get that 3tb of its feet .75% it will have platter damage :mrgreen:

Mayank, Training And Concept Clearance Is What Yo Ned At This Stage ,Go Slow Learn Slow ..

Hi, Most of The 3 TB Are Fully compatiable With 4TB models ,Can you upload ROM To Forums Here For Me to have a peek at your rom and give some suggestions

Hi, Guru Scott Moulton Has Some Excellent RAID Tutorials And So Do Many Others On Youtube Boss

Well, Some Of You Americas And Europeans Will Not Even Touch Hard Drives In The Condition We Get In India .India Has This Fine Dust That Sticks To Anything .I Keep Checking Channels On Youtube were you folks just go to your cleanrooms and open drives .I have a special laminar were i spend...

Hello, I am Sharing My Method Of Converting a USB PCB To SATA .In This Example its a Toshiba But i Have The Western Digitals Also .If My Tool Allows Me To Read The ROM Via Com Port Interface Or Via Native USB From Patient PCB I Read It And Program The Donor i Have Converted To SATA...

Hello, This should be done at the last so that the heads are stressed much less .Can you share a case scenario so that i can pour my suggestion out please .Just reading bad sector is not good

Hello, I See a Lot of Interesting Stuff Here -> https://www.youtube.com/channel/UCjeQEm ... -Han-11LgQ .BTW My suggestion is that you work on the 3TB first and only attempt this if te 3TB is Cloned ,These Models Are a Nightmare

Well, You are acelab now you should give us answers :D . This could happen if one of the heads does not have proper ability to write ,Try another set of heads and try it again

Well, According To Them You Cannot Get a Drive Working If You Physically Cut a Head :D .How many of you know this is wrong information ,I do this daily

Well, How many of you old hddguru people remember anaesa arora from india dimitry had created a special section for that fellow on hddguru for many days he is the once who gave this idea to deepspar and deepspar fell prey to the idea ,Now he cannot sell market it even in india lol

Well, The fishing line works like a charm but as its nylon beware of static ,If thread is charged tends to stick to platter before we can place it behind the sliders

Hi, WD10EZEX-00MCFA0 Is TresXLB2

Hi, its USD 380 and USD 180 per month

Well, i also got a kit but still never used it ,No idea if its needed in some special family yet or not

Hi, Were are you based at might be we can suggest someone

Hi, Fred I will be releasing this guide this month ,i will inform you sir

Hi, Drives With Following MDL No Have Started To Surface in India " WD20SMZW-11YFCS0" ,PCB No is 2060-800067-001 Rev P1 " . Any Idea of family and SATA PCB ,These Are Now Looking Like Rosewood And Are Into 2TB WDC USB 3.0 Enclosures

Well, Cannot click on attachment and open it

Hi, This is a spam user ,He copied my entire post and pasted here ,His idea is to take you to the second link he has posted in his post check it .This guy slipped from your hands jared finish him :mrgreen:

Well, Pardon me i have suddenly got a truckload of these drives and i am quite a expert in this .Most of the operations in rosewoods are and can be preformed without using translator generation .For restoring access back you have to write sysfile 028 of volume 3 not file 035 of volume 03...

Well, Whats the point ,Tell the folks what was the issue and what you did ,then only its useful

Till Today Even Now, No one has ever answered my post were i have asked to to disable bad sector reallocation in samsung drives :D

Well, Off Course i will anytime anyway if someone asks me .My youtube channel is growing very slowly but i have crossed 400+ subs now and i am planning to add a lot of quality content there to ,People who are worldwide do ask sometimes there and i will gladly recommend your services to them...

Hi, I wired it up and i was able to access it with my data connector .I did not change to data board as i have no idea which one to use .But i am sure that the latest slim 1 platter + 2 head toshibas i see in the indian market should have a sata board that 100% compatible to this i need to...

Hi Jared , I Just wanted to say a big thank you to you .Off and on i do get someone whom you have referred to me for a data recovery job in india .I assure you that if i get the case i will try solve it with full honesty and experience i have .I though i should let you know i really...

Hello , Please do 2 things .Kindly attach rom on patient and donor to a post here .Secondly sometimes its necessary to copy RAP/CAP and SAP Module Tables From Donor Rom To Patient Rom .

Jared and SAM , i too recently solved a translator issue on a rosewood 2TB that was retired to customer by another lab in india " Who had acelab tool " .The drive would give sector access to 35% of the total capacity ,Manually working on the problem and adding defect entries to the NRG list...

Seriously , Do you really think so ,I had a serious hot debate with few guys on a Facebook group just because of this ..Generally All of us who are into Flash NAAND Recovery Can Do More Then 90% of the jobs reason some are not done is due to the fact pinout / raster is not there .But once you...

Well, I think they should include a list on bugs solved and features improved when they release any minor/Major update .Do Acelab TS Department Guys Actually Listen To Advices And Genuine Feedback

Well, Got a USB G4330A Today .Its a Slim 1TB Toshiba MQ04UBF100 PS : I Am Wiring It Up Using a SATA Connector .Will Post Results By Tommorow

Hi , It Would Be Nice If We Could Find out were you are from and suggest you a good professional in your area/country

Jared , Soon Expanding To 3 More North Indian States Haryana ,Himachal Pradesh And Punjab . Also Working Out on Jammu And Kashmir , Rajasthan And Uttar Pradesh .Like this We Will Add 6 States To Our Profile And Have Very High Percentage of Penetration .First City For Branch Office is...

Hi,, I have seen this message but not while editing sap .Are you trying to work around a platter damaged seagate hdd buddy

Blizzard , Two overlay models fw code should match rom ,If it does you are good to go ,If not you can use most of the roms by getting sa access and changing those two modules

Hi, Can you show us the wobbling platters ?.

Well, in that case open the files in a hex editor and view them actually you will definitely able to see were the issues is

Well, Long time back i neither had the tools or the money to buy them yet i could work on 100% of the drives i got with the custom tools i made and erkin from canada send me a head shrink tubes in two sizes till today i use that ,Specially for Ramps its not a necessity

Hi, My Debate is on the Tool Itself ,The E Type Tools That Go On The Platter And Try Get The Heads Out From The Inner Parking Area Or Try To Unstuck a Head .I can give you convincing Evidence that These Tools Need To Be Refined Or Modded To Make The Task Work Properly .I am Open To Debate...

Hee hee , i think he copied my style even my camel case writing rest i have no idea :mrgreen:

Well Mr Larry , If these heads did not work in your patient i presume others even the best matching once would fail

Hello, Anyone Out There who has tried Diablo 3S Heads on The Diablo 3D ?

Well, I too use hddsurgery tool,No issues with the tool at all ,You can see this in action here -> https://youtu.be/zKBQgpZoI1k?t=4m7s

Oh My God , When you teach them they refuse to learn and this going on and on and on and on and on and on and on and on and on and on and onnnnn .

Jared , Remember We Can Again Have That issue Were PC3K Identify It Differently

Wow , I was reading some posts down and i do not think any hdd rotates if preamps are fried inside .If indeed the inner preamp and the head flex cable is fried i have seen only 25% success rate in head swaps ,due to the fact that if indeed it happens that time hdd is spinning and when there...

Well Larry , Once in a While We Do Get Drive That are A Pain In The You Know what i am trying to say .I had spend one day on one drive no joy had to return it .Very rarely it happens but it does happen

Well, which tools do you have for doing flash work and what version are those and what all adapters you have for the tools you have

Well, 100% encrypted

Larry , Sir PC 3000 Has 2 Mods That Mod The Rom So That You Can Short Read Channel And Get over with the case ,It did not work the only one time i tried on a seagate though

Jared , The following are pending 1 : Deepspar X 2 units 2 : PC 3000 SCSI/SAS + De + RAID 3 : VNR 4 : Softcenter PS : Last Month i got a lot of HDD surgery tools .The Workbench , Seagate 1 Platter And 3/4 Platter Rampless Tool , Rosewood i Had Before but i had not opened packed .I want to...

Well, The Answer is No Cos i know what you were wanting to do .Mod the rom for the drive right ,but i had one case and even that method did not help

Well, If You Know Modern Hard Drive Rom Structure In New Families Like Rosewood You Can Do It With Those Also .I Know One Guy Why Can Do This Too In These Family .Data Recovery Field Has Many Talented Engineers

Well, PC 3000 UDMA/Express Rocks .Now i Also Have Rapidspar :mrgreen:

Hi, After the glue application is the head even going near it "Scratch" if yes you need to make sure its little far off.Also check that surface Under Microscope .This Mod Should Work If You Use New Set Of Heads ,Do Check For Preamp Before Swap .This is a RAMP Based Model

Well, I could see the HDD was Well Detected ,Thats Why i Was Puzzled Also

No reply , I did not get any reply from jared i m sure he missed these posts

Hello All, Multi-Com Has Released The Much Anticipated Secure Digital SD Adapters .I Am Very Thrilled To See The MR29 Model For Sandisk Moniliths . The Link -> https://www.youtube.com/watch?v=GPHeLh1NwIw https://www.youtube.com/watch?v=GPHeLh1NwIw

Well, We all need to tell them to give us updated log of minor updates also they never never never do it so there no idea whats fixed and whats not fixed

Hello, I get a message that i am not authorised to view this is this thread deleted

Well, Why were you banned this time

well, Try i am sure they work

Well, In That Case You Should Send HDD To A Guy With MRT Tool And Try Reverse The Process Created By Tool.I Can Help if you agree to ship drive to me and pay for courier charges

Well, Unlocking starts with rom not sys files you have got the entire concept wrong ,Read a bit more about seagate .

Well, I have it its a great tool ,i am planning to buy other too still :(

Well, God just wants you to buy this tool :D :mrgreen: :D

Well, You need to go through this again .The latest Version is very good .Thier chinglish is not at all bad now .I would consider their Tool in WDC and Seagate to be very good .Jared i would say the tool is very good then DDI .Go Ahead And Buy the Ultra Online Edition .You Will Just Pay USD...

Well, MRT Ver 2.1.1.3 is really good tool,Serious enough for a lab all you users should give it a shot .I had 2 MRT Pro's That i Have Ordered a Update To MRT Express As Pro is a Discontinued Hardware .I also Ordered a Ultra And Man Its Very Very nice .I can get speeds upto 166 in cloning ,i...

Well, First i Bow Infront Of All The Great Computer Repair Vendors " For Heavens Sake Stop Data Recovery Experimentation If You Do Not Know What the Hell You Folks Are Doing " . Now Coming To The Point I Got One Hitachi - IBM Drive HDP725025GLA380 " HDx7250GL " Family .PCB No is 110 OA90026 01...

Well, Alright Does The Same Head Work Or You Mostly Change in This Series ?

Jared , Please Share With Me The Procedure By PM Or Here .I have to few to handle

Well, The Same Applies To LT Series Slim Seagates And Many Drive Which Have No Screw Support Down .Also i Would Love to hear some tips for removing head stuck issues with rosewoods

Well, i freak out when i see that there is no screw on the head stack as only one screw keeps it erect and we blame the tools

Well, if i have understood your reply i take the answer as NO right .

Well, i searched for ST500DM002 this showed the following also -> https://apextoollab.com/c_type/sea_11es2lp_4.html are you sure this tool works on this please

Pclab , I use tape method using 3m tape :D

i love your site off i on i read all you opted cases it will be fun if you can provide even no details

Hello , i do not think he is banned but i have no idea why he has a banned user id under his username .I am shocked to find out he uses such foul language about me to other members of the community .I purchased a LM Series Head Replacement Kit From Nikola And HDDsurgery And Till today i...

Well, How about a low assessment feee for each case and then letting them know which tier it falls into .I use this strategy in india

Betty , I wanted to ask you if you were able to read/clone mft records of this drive ? . If i can get your answer i think i know whats going on

Well, Are you saying we write 35h sys file back to hdd after translator regeneration ,What Happens After That The Partial Access Problem Gets Solved i do not think so .Here see a thread i created and see the replies -> http://forum.acelaboratory.com/viewtopi ... 154&t=9521 .Aj2008 Comments...

Hi, Sofitech is another great programmer

Well, I think its the tool ,The Version 6.1 i used for more then 3 years was super good

Lol, Luke is spamming :mrgreen: .But i go to your forum once in a while ,I will try to be there more often

Well, Here it is -> https://technet.microsoft.com/en-us/library/ee523219(v=ws.10).aspx

Lol , You Made My Bad PCLAB "Bad Boy X 2 " :D .I Am Of The opinion That When You Got The Folder List That Was All Wrong Metadata And Pointing To Wrong Sectors That did Not Have Anything Hence The ZERO Inside Files .What All Tools Have You Tried Till Now PCLAB

Well, I am sure M3 Can Do It ,I Have Used That Many Times With Success

Well, You Are One Of The Skilled Guys ,I Want More Active Participation of your Company In The Forums .

Well, Yes i have ,May i know what have you tried till today

Well, My Experience is That One Tool only Does Does Not Cut The Jobs Much As It Might Be Missing On Some Resources Like XOR of a Chip Not There Etc .Having All Three Is a Feather in The Cap and helps to solve more cases.So percentage of success increases

Well, The World's Best Data Recovery Company Could Be Worlds Best For Management , Customer Handling ,Etc Etc Not Just Percentage of Data Recovery .These Guys Know What They Do And Are Old Players in The Field .I have seen a few videos of their nice work

Well, Might Be You Can Speak To Dr Kiev And That Dimitry Guy And a Few more Chaps For RAID .For Flash i Recommend You Buy All Three Tools And Enjoy The Power of Three And TS Support Of Three .For Flash Cases i Would Love To Work FOR FREE For You if You Can Send Me The Dumps And I Could...

Hi, Its Better To Seal it With 3M Tape Then That Lousy Foil

David , Sorry To Check Your Post Late ,Most of The Time I Am Working On Bottom Or Top Heads so a tweezer with up down actions was enough to do the trick .If you have a Nipper you need to file the front outer side of nipper so that it can go inside the inner heads .I have no idea of sams...

Well, Trust Me a Logic Analyser Is Something totally Out of The World For Analyses

Well, Remove PCB ,Give Power Wait for Sometimes For It To Get Ready ,If Not Ready Give Soft Reset Still Nothing Give Hard Reset ,Once Ready Give Sleep Command ,Once That is Done Put PCB Back To HDA ,Once That is Done Start Motor " Recalibrate " , Try To ID ,Revert Back On Forum With Your...

Hello , R Studio From www.r-tt.com Is Very Good ,But Sometimes i Prefer Alternatives

Well, This i already told you solved a case yesterday

Haa Haa , That Was a Good One Jol

Hi Jared , This Happens When Heads Are Bad in This Series And Platter Firmware Has Not Initialised

Jared , Location " Chandigarh ,North India ] Mechanical Drives [ Logical , Semi Physical And Physical ,2 Cleanrooms ] Salvation Data , MRT Pro X 2 , DFL SRP X 1 , PC 3000 UDMA ,Rapidspar SSD Hard Drives [ Logical ,Semi Physical And Physical ] PC 3000 SSD Module...

Well, Open Modules Tables Is Not OK . I wonder how pc3k solves this salvation data could do this in one click i loved salvation data hitachi tool

Hi, They might have observe red the sound using a stethoscope

Jared , I have started to collect money for this

PCLAB , The Most Funny thing i Heard From The TS Support Guys Is That Heads Should Not Be Physically Cut But Bent ,They Say When You Cut Heads Physically Drive Can Never Read Or Calibrate ,I Fell of My Chair I Have No Idea How Many Times I Have Done This .Can i Have a Look At This Case...

Well, I Am Close To Finding a Solution For This Firmware Issue Now

Well, At This Level You Work With Media Cache in This Drive .Can You List Some U Setting Options .And BTW Does Any of you know the difference between ATA direct and Ata indirect option in system status

Well, Its in Office And i Am At Home .BTW does Any Of You Have a List of Level C Commands in Rosewood Or Other F3 Family

Jared , Yes Boss They Do Few Things At Level C ,I am Myself To Take Tech Support On These Drives Again

Jared , I Have 8 of Them They Were Not Able To Solve even a Single Case ,I am Now Told They Have Solution For Some issues i Will Create New Tickets And Checkout ,They Work At Level C In This Drive i Have Seen One Video of My Student when they gave him tech support

Hello To All Mr Friends Here , I Have This Issue And My Knowledge is Challenged In WDC With This Case .This is What I Wrote For My Ticket In The Acelab TS Ticket Software .I Did Some Work On This Case Created Some Folders And Created The Ticket As i Wanted Support . Question Posted :"I...

Hi, What Version Are You Talking About

Hello PCLAB , Do You Have Other Microscope Already ,What Do You Plan To Do With This .IMHO Normal Scopes With And Without Camera Are Best Cos The Hands Are Trained To Function On The Case And Your Eyes In The Scope Eyepiece .Brain Balances This Very Nicely

Sam And Jared , I Too Wasted 2 Donors 2 Days Back In a Thin 500GB WDC 2.5" Sata Drive could not find any platter damaged with my eyes ,I had one good donor and recovered a drive ,after this i used those heads in this patient and it clicked ,Changing back these heads back to donor resulted...

Jared , That was some patience you had ,This is the way to do it

Larry Ji, Can You Post Some Pictures Of Its Backside ,Video Was Good i am sure it does a decent job IMHO

Jared , Can i have a link to your store ,Just curious to see it

Correct Observation , But i did notice it once or twice .The Toshiba Virtual Translator ignores g list IMHO

Well, And Why Not Jared Should Have ZERO Issue With This ,Plus He Can Enjoy a Colour Display :mrgreen:

Well, Luke and Jared ,This is Bound To Happen As In Toshiba Sometimes Data Is Being Recovered By Just Taking Into consideration P List .I have also experienced DATA Shifting Using Toshiba Techno Utility .Hitachi Should Not Behave Like This If You Have Taken Into Consideration p And G But...

Larry Ji, I Am also Going To Order 1 Unit or Two For My Lab .Very Decently Priced .

Sir , WD5000AUDX-57WNHY0 " Trails " Family Edit : Oops Never Realized i Had Posted This Earlier Too

Well, Have to noticed platter damage or bad sectors with your technique ,The technique i use is dangerous but ZERO platter damage

Wayne , This trick worked ? or not boss

Haa Haa , Good going on this one ,I had to call andy to help me source the hdd i wanted but i am too lazy to followup and order now have tons of physical cases .Just completed emptying 50 pairs of gloves doing 50 odd cases .About 50 to 75 odd more pending damn .Wanted to post something i...

Hi, So is this confirmed now G3959A ----------> G3918A

Hello, Try isolating board from HDA .Then get the board to ready condition ,Put board to standby ,hook it to HDA and recalibrate and then id the drive .Works many many times . Ps : you will need to do soft or hard reset to get board only in ready state

Well, Inspite of Me Paying And Ordering He Cancelled My Order .I Am Not Taking Help of My Friend Andy So That i Can Get One Unit .BTW This Listing is Ended Now

Hello Everyone , Today again i Have Stumbled Upon The MQ03UBB Series 2TB Drive Called MQ03UBB200 .This HDD has a PCB No G3959A And i would further add that this hdd has one of the most flimsy pcb tracks even soldering a SATA header To The USB board and drags the track out damn .I have made...

Well, i know about this tool since many months ,good progress is going on in this

Jared , PC3K is ok for this

Hello Everyone , As You Are All Aware We Have Low Charges for Data Recovery Here But Still Your Friend And Forum Colleague Amarbir Has Worked Very Hard .Slogged Like a #$%#$% For Hours And Days . Some New Tools I Got Or Are Coming Are ..... 1 : Rapidspar With Data Acquisition Addon X 1"...

Jared , I Got a WD5000AUDX-57WNHY0 Pc3K Says It Trails

Larry , Sir this is good work but it will be better work if its longer ,BTW i have this for the work -> https://www.drtools.eu/en/product/23/sh ... nd-wd.html

Hi Everyone , I have a Pile of these but could not solve even 1 drive yet .Due to the fact its a firmware issue acelab says do not tinker with your firmware

Nice , But i sent him a email few days ago no reply ,also Wondering How They Look Like :mrgreen:

Hello Jol And Jared , Sometimes its not readable i have experienced it before ,Along With We Are Unable To Parse sys files even if we read rom then it becomes and cat and mouse situation

Well, Have You Seen The Videos They Are Uploading These Days ,Man They Are Kiddish ,Its Like mammaa handing a toddler ,So i have no idea whats going to be in these

Larry sir , :D photographs were missing in this post ,Some stuff i understood some went off my head .Can i have a url of the tape you used to buy and try .

Well, Larry sir its due to those dampeners inside platters otherwise you could put tape at the side of the heads and rotate platter

Well, I have waited for months and i would say first should be softcenter ,then acelab then vnr .Why cos with softcenter you can solve most of the cases ,Then having PC 3000 Gives Additional Capabilities Then VNR At The Last For Expert Experience And Research

+ 1 , I am also going to Renew TS in The Next 3 Days

Well, Mr Larry By Hook or Crook You have to adhere the tape ,Use a plastic card or something or more gummy take like aluminium etc etc .Like Schott Moulton used in his demo

Well, You Are more then welcome brother

Larry Sir , Other Benefit Of PCB Removal And Then Poking The Head Connector block from down is that you do have the capability to clean the complete hdd before taking it to the cleanroom .Its always very convinient to pop it off the way to learnt but take care sometimes it can fly out like...

Hello Jared , Can i have password please

Hi Friends , This is another Video I Have Posted With My Views on The Hardware of MRT Ultra .This Product I Had Sourced For One Of My Students " Bejli " . This is a Product Unboxing Video 2 More Videos Will Followup of " Installation And Registration " And "Going Around And Working Of...

Hello Everyone , In The Next 2 Weeks ,I Would Be Releasing 3 Videos On My Youtube Channel Regarding MRT Ultra Product Unboxing and My Views Of The Bundled Accessories , Next Video Would Be Setup And Making It Run On a New/Old System and The Final Video Would Be Going Around The Tool...

Jared , Please Have a Peek Here -> mrt-pro-forum-f9.html .You Have Called The Category "MRT Pro" .MRT Pro Was One Of their Tools And Is Now Discontinued And Replaced By MRT Express .Might Be You Can Call This Category 1 : MRT [ Data Recovery Tools ] Regards

Simon , The "TJ" In The DCM Seems To Be The Key Here Along With Many Other Factors .

Jared , Confirmed Firebird And FBlite

Well, Absolutely No Comparison With Arvika But i Can Nail Many Cases Now .Infact I Have Taken a Domain That i Will start Adding Monolith Stuff Etc Next Coming Month .If Data Is Critical Arvika Is The Boss ,If Sometimes You Feel You Wanna Get It Done Cheaper I Am Be At Your Service . Jared...

Hi, Very Bad Case Seems Like Platter Damage and Freezer Trick Both At One Time Great Customer

Sam, Do you have a fiber pen or small grit sandpaper can you scrape off the protective layer and show me the circuit

Well, Keep us Posted

Thanks , I Will Look Into Your Hindi Work And Then Help You With Any Issues Will Take Me a Day To Go Through This .Also I Have Knowledge Of Punjabi Language ,You Can Attach Your Those Files Also For Me

Maximus , Have You Added Hindi In The Supported Languages Also .Hindi Is The National Language in India ,The World's Second Largest Populated Country .Secondly Are You Planning Of Adding a Serial Port Or USB Assisted Power Controller For Your Tool ? . Might Be As a Additional Addon or...

Jol , In Jared Case i Vouch For Heads 50:50 Percent .Because If You Block SA in ROM You Should Be Able To Upload LDR And DIR From Platter .BTW Jared Disable SA Access in New PCB With Whatever ROM Then Close All Heads But 0 And Try ,Also Close All Heads But Head 1 and try ,Worth a Shot

Jared And SAM , Can You Both Check if The ROMS Of All The Mars Family Drives you have are same size .I Will Also Try And Help With My Contribution To This Issue ,I Am Going To Check This Issue In Lab Tommorow .I am Sure When Three Brains Will Work On This Issue At The Same Time We Are...

Sam, Its a Dirty Old Habit ,I Will Make a Video For You How It Happens Naturally In My Typing Its Been Ages i Do That .Sorry For This .I Have To Reformat My Computer Once On Sunday As I Had Recently Updated My System And I Have Installed a Mechanical HDD As Main Drive Instead of My SSD...

Mr Larry , I Will Keep everything Suggested In Mind ,The Issue Is That In India If We Have a Broadband of 1MBPS the Upload Speed Will Be 100 KBPS Only This Totally spoils my Resolution if its a live Video On Youtube ,In Facebook Its Not That Issue Right Now Why i have no idea .But I Will...

Well, This i go to and read once in blue moon ,I though you are talking about a forum .I want it to remain a quite place :mrgreen:

Jared , I think this issue is more or less related to PCB in this case .As You Know That The Voice Coil Does Get Current From PCB might be there is somewhat of a issue in this .Because if the power goes the hdd should reach back in parking area ,Its more related the main MCU as thats the ic...

Sir , Can You Share Link For "Data Recovery Certification Forum "

Well, To Find Out What All Modules Are Present In Your Specific Case You First Need SA Access ,SA Access Should Be Easy if You Indeed Have a Matching Donor Rom to Your Servo Version in The Patient .You Can Get Away With All The Nonesense They Say In Regenerating Rom By Just Using SA To...

Hello Folks , I Have started to live stream into youtube on daily basis .One Good Topic i have covered it Why Customers/Users Should Not Try a Head Unstuck Themselves .Also i Have Discussed Why Some Heads To Not Go Back To The Ramp Using The Drag Method " Specially True To Western Digital...

Mr Larry , Yes You Have To Apply To Many Groups ,Once The Admin Approves You Are In .How Many Data Recovery Forums You Are Currently Using everyday Can i Have a List Might Be If i Do Not Go To a Particular One i Can Start Going There :D

Jared , You Are Not Suppose To Block SA ,You Are Suppose To Keep Programming Different Roms And You Will Find One Rom That Reads The Servo Information on The Platters .Once You Achieve This You Will Get SA Access And Then You Will Be Able To Program New Rom By Using SA Modules .Even If...

Larry Sir , I do not see you much on Facebook data recovery groups i do quite a lot of work there ,Me and Andy are very good friends i have publicly made a video appreciating Andy ,I did not know i had to do it here assuming you all folks know that ,I am sure jared knows that if he has...

Hee Hee , I will keep my promise made few days back ,Someone should try this once but everything should match in the donor hdd then it will work 100%

Sure , Thats bloody icing on the cake damn :mrgreen:

Well, These guys are everywhere :D

Hello , I Have Now Learned This ,One Day I got a case where all 4 sliders were broken and stuck on the platter surface .I Got a Nylon Thread Made a Hook of It .Used Tape Method To Take Both Platters Out ,Platters were literally in my hands and removed all 4 sliders ,put platters back new...

Hi, Any Change In The New PCB After a ROM Swap Or Same ?,Mostly The Flash IS Where the focus should be ,If you have same drive same firmware etc you can do a secure erase in the donor then that pcb's flash gets empty too and a board swap works otherwise it does not ,PC3K has also added some...

Well, You got it from that italian selling at hddguru ,He backed out on me in the last moment :(

Hi PCLAB , Waiting For Your Answer

Alright , Do you have the exact same hdd with the exact same firmware

PCLAB , Is this a SSHD or a simple HDD .I see the Board to be messed up why not swap ROM to other PCB And Try Once .Can You tell me what Family This Drive It .How About Attaching Rom To A Post In Forums

Well, Please check smart modules or sys file and replace them with donor if possibly

Alright , Now i understand this a bit ,And all of it makes sense now .Waiting for the deal to finalise if not then i will spend this money on my VNR rusolut Purchase

Jared , Thank you for this explanation ,Is Network Addon a physical card ?

Great , Do look into the possibility of adding a "Solved" button also ,Helps to know which thread was solved and which once remain unsolved

Hello All, I am a little confused here .If i buy The DDI4 Card Can i Use "Deepspar Recovery environment " .IS this only going to work if i have the "Network Addon " .What is this Addon what does it look like is this a separate card or is this integrated into DDI main Card :?:

Bankole , Thats Fine ,Jared Can You Add a Hack to the forum were we can just press the like button if we like a post like i wanted to do this to bankole's post .Also how about a solved button also "Which would mean that people do come to know that the problem was solved .I have seen this...

Thanks , To All Of You ,The Product is second hand and it comes with 4.45 version and i called deepspar they said they need usd 350 to update it to latest version with 1 year support :)

Well, if you too plan to sell it gimme a pm whenever i wanna buy 1 more cos i have 2 special computers created for this tool

Jared , You edited the post and added more words for me ,I will keep that in mind for sure and try and give more constructive ideas and replies

Well, This is one reason i do not write too much or discuss too much i have crossed that stage ,Only if i think my secrets remain secrets will i share that ,You do understand the value and time taken for research in data recovery field .But i enjoy the forum much as you like to keep it...

Well, Correct you seem to get triggered like a bomb sometimes .Take an example here ,This post if totally pointed towards bankole yet you seem to be offended .Secondly why did i ask this to bankole ,Well few months back he had a issue and i tried to help him over team viewer by trying to...

Well, Most of the great mobile phone platform hacking teams are based out of europe ,If acelab can combine their services with their mastery over data recovery it will be a winner .As fas as pricing is concerned we will see when they release it .Mobile phone boxes are really cheap though

Wrong , I can debate on that if you are interested ,

Well Buddy , If i swap Heads off new seagates That are one platter citing you an example and use the old school method of getting the drive heads off the end and then inserting a plastic old school tool the success rate is much better ,If i use ERtools the success rate is much...

Hello Everyone , I wanted to ask you all a few questions regarding Your Experiences Regarding ER-Tools And AceToolLab Tools That Go Over the platter pick the heads up and go back to the outside either on the ramp if its was a head stuck case or a outside the platters if it was non ramp case...

PCN , blocking sa on data was always available i have ver 6.1 .But you have the latest one might be you are saying something that new and i do not know .I know its time to update my tool too .First i Buy VNR ,Then Update this to ver 6.3 should take me about 3 months

Hi, I was of the opinion they would be adding support for the st1000lm035 and the st2000lm007 drives but both have crypto firmware rom and what not .

Hello, I Was Referring To The post were you said other chinese site which i have no idea about .I have learned that The Series i am interested is Called MQ03ABB Series And They Have 2 HDD's One 3 TB Hopefully With 4 Platters And 2 TB With 3 Platters PS : The MQ03UBB is Just USB Part Of...

Hi, Another Great Tool Like R-Studio Is Getdataback ,Please Try That Also Once On The Cloned Drive

Well, That Sums Up Then.Also Try The Demo Seagate Software Recovery Tool And Watch Post Results

Jared , Jol and PClab , Today i have also got the following ... G3959A ----------> G3918A Now i need to find out which SATA Drive They Sell Have this PCB -> G3918A .Jared Which Chinese Site You Refereed To Can i Have a Link Please .This Case I did I Have...

Hee Hee , Very Naughty Boy Indeed :mrgreen:

Well, To Mention Even Seagate Uses a Rstudio Stripped Down Version

Well, I might but a cnc router and a 3d printer some time this year for some tools making

welcome sudheer

Hi, I will give it a shot tomorrow

Hi, I stumbled upon this in hddguru ,But i lost that thread i think it was in the r-tt thread posted there ,Have you tried it jared ,How is it ?

Damn , That were some crosses done boys .specially the hitachi heads keep it up

Jared , what do you have in mind to buy which sla printer

Well, it seems to be very useful as far as oscilloscope function of power is concerned we can find out how the drive behaves n all jared .

Hello, Can you record the sound and post it in a link or something

Well Jared , I hope someone buys and tells us :mrgreen:

Well, Good work Mr Larry specially for the metal use

Hi larry sir , i now understand what you mean .But i also say it should not be that tight .The best would be you get a thick copper wire and cut that to size and epoxy one end into the plastic .I can bet that you will love the acetoollab ramp tools very very good just used them yesterday...

Sir , DFL does not make this tool ,This tool is made by some chinese company and these fellows take it from them .I read your answer but could not understand it .Can you please post a picture and explain what happened .As fas as i am concerned seagate recoveries are not too great in lab...

Jared , Not many apple recoveries here .Can you explain bit about Apple core storage , Apple File Vault And Apple Fusion Drive ? .

Hello sam, I have experienced in few drives that if you try patient pcb on donor it can modify nvram code in very rare occasions .Please make sure you do take a nvram backup of patient before you try this .Atleast main mcu and motor controller should be matched before you try on donor...

Wow , amazing what has a thread with discussion on lawsuits to do with PSID ? . Atleast think before you post in each and every thread

Well, I have seen very many hdds with scratches on outer edge ,mostly its under the tiny extended ramp on platter surface and poses no problem to drive operation .The concept presented here is good with the fact that i can now inspect platters that are in a multi platter stack

Hi pclab , this virus has many variants only some are decrypt able brother

Blizzard , i am saying they are dfl only this is what i am saying since first post

Man Jared , Sometimes i roll off my bed laughing this was one hell of a video lol .The icing on the cake was when i saw a plastic cover on main on off switch and main cable lol when there is fireworks in the table first we have to find a screwdriver then open 4 screws then close the main...

Jared , This is worth checking

hi , i do not understand what you are trying to say . Ps : i now have solid proof that its dolphindatalabs venture only ,will post some screenshots tomorrow if i get the time

Hello All, This Recoveryrus Seems to Me Like Another Venture Of Dolphin Data Labs .Few Days Back when i Landed On this Page I Was Greeted With All That You See But My Data Recovery Sharp eyes Caught Something .The Email ID Written was Of Dolphondatalabs "Today This Information Is...

And , You are from what country

Hi All, Today i was getting DOS errors with a terminal locked grenada so i did the terminal unlock procedure using pc3k but it could never parse the table and get to a ready condition .So i just did the unlocking in the tool then used command m100 at level 7 and then voila .Can someone...

hi jared , as you know this did you try working on board level on this once more

alright , can you show me the complete photo out outer shell and some markings on the pcb so that i can check my small inventory for you if i can find the info you demand :D

Well, Well in my opinion yes ,I use it everyday and everyday i feel the same when i use other logical data recovery software .For RAID i have reclaime and for file carving i have other tools ,It does work but not often for me .Also totally useless for RAM recovery of modern cameras . BTW...

Hi, I know all of this ,how many logical cases you handle each day can you tell me ,Because i think i handle quite a few of them ,I am Not talking about GDB i am taking about GDS

Hi, Stuff is always cheaper in china then dfl website ,You just need to use and have sources

Hello Jared , What Tools Do you have for NAND Flash Now

Well, I consider rstudio to be crap ,as it will show useless files with nonsense headers " My Opinion " ,Luke you try Get Data Back Simple For a Change And Try Level 3 Analyses in this tool for a change

Hello sam, Thanks for the explanation on this .My Idea Is to Make a tool concept is right here in my mind .We Insert This Tool in a multiplatter platter arranged drive ,The tool hooks to each platter ,Once this is done i unscrew the top screws and then lift the platters up ,Once...

Hello , Support Was Good Intially But Then Became Bad And Later On Never Existed At All

Jared , To This i Fully Agree ,I Have The Latest Version of CnW " Commercial License With Dongle " .The Version i Have Is 5.21 " Though He Mentions 5.20 In His Website As Current As of Today .I Wish He Looks Into This Thread .Infact If He Wants I Will Send Him The Images On a DVD-Rom

Jared , Thats a Fair Explanation

Brian Sir , Yes i have tried .BTW i called a guy who had the same camera to my office .I took a 8GB SD card and zero filled it ,Then we inserted it in his camera and formatted it .Clicked a few shots and also some videos ,Then i made a image of it to a file sector by sector .Once this...

Well, No Current tool supports this .Charges would be 400 To 700 Euro for recovering this drive .None of the free tools you have work on this drive Rom :shock:

Hi Pclab , Angle does not matter here ,just position them under that small hole close to the slider/heads .Well these tools have to be this small ,BTW i am sure you will love to use them

Well, I would prefer soldering to a spider and never feel secure it actually connecting to the pad ,Secondly eleven pressure to the critical crystal inside a monolith is too risky ,

Hello Everyone , Their Tools Were Small But Some of Them Like The Seagate ,Western Digital ,Hitachi And Maxtor Were Fine Tools .I do not know which poisionous snake bit their company owner in the A#@@# one day and the had a wild dream of not developing those tools any further .The new tools...

@ Jol, As The project is based on dd rescue itself why should it be slow ,This is interesting ,Is this due to the fact he has implemented many fancy things into it or what

Jared , Can You Post A Screenshot Of This Proggie .....

Sam , I Have Two Questions For You ... First : You Designed And Made A Tool To Spread a Multiplatter Platter And Not Loose Alignment .Is This What You Said .If Yes I Too Have a Few Idea On This Project Myself But i Will Not And Cannot Implement It right Now .I Need Some Time To Complete...

Hi, i still have to try it ,might be this week

Of course , here you go -> https://www.checkline.com/product/TSD

Well, Might be i am unable to express my opinion properly .As you know working with Camera videos is little different due to fragmentation .So the method and technique for the same would be different for different camera by the software developer in my case lets assume CnW Recovery .I have...

Well, 1st Card is used formatted and some footage is overwritten ,2nd Card was inserted in card reader in a pc something happened and customer cannot see his videos .

Well, Something is not well with this tool and Canon EOS 80D Camera Videos .I have A Fully Licensed And Dongle Version of this tool .Infact i have Ver 5.21 Feb update .I do not have time to email support this month ,Too many things going on at new office

Hello Everyone , These days i am seeing a flood of Canon EOS 80D Camera Video Files Recovery @ My Office .None of the Tools I know can recover These .Can You Help Me With This .I do Have Most of The Logical Recovery Gear Used For Video But None Works So Far

Hi Jared , 3D Is Indeed Rare to get even in india

Hi, How about measuring torque while opening all the screws and then using same torque to tighten them ,This helps i know this 100%

Jared, do let us know how it went

Hi jared , i have never tried it but how about getting same firmware rom and slowly adding cp.'s from patient to it ,I think there is a method to take out Cp's from rom ,looks as if frank has a tool or might be pc3k could do it ,never tried though

Hi , i had checked bankole case and i was of the opinion rom modules were bad ,I gave him few firmware links and tried 18 different roms but not all in the list as i was tired .None of the roms worked .but i was damn sure some rom will work and my question to jol is did you change edit rom...

Jared , Let Me Try This And REport Back

Hi Everyone , I Am Working On This Case Might Be This Monday I An Bankole Will Nail It

Hi Everyone , I Have a Case Of Shrek 2TB But No Donor ,But i Have Ample Donors For Shrek LT .Anyone Crossed This Two Families .The MCU And Motor Controller Is Different And Hence i Think Not Compatible

Jared , Thanks For The Tip

Lets Ask Them , On Acelab Forums ,And See What They Are Saying ,I cannot Understand Then How Its Done .Might be we get a new family and you update and then acelab categories it in different family ,Lets find out whats what

Noted, In pic i was seeing maxplatter debris on that exact head hence i got confused

Very Very Strange , There is never a shortage of learning DR daily man.I too have a Hot Swap Case That i need to get over with will post to get everyones response

Thanks , Will try not to do any thing that upsets anyone

Cool, Will try this first thing in the morning

Well, But i am yet to try and see if it can read HDD user area also via terminal like in acelab tool

Well, That would explain in well ,I wonder why these IT Admins Play Around With Their Toys

No, I code each headstack with a number and keep record of that in a book/Computer .When i need something i use that head no .

Jared , Check Second Picture ,This head is full of platter dust

Jared , Thanks For The Good Explanation

Man, How Can a company Who is a Pioneer In HDD's Make such Junk

Hi, Could It Be The NAS Enclosure Encrypted The HDD Also ?

Hi , Just a Small Update Needed From You According To My Brain You Need 2 Complete Units As You Work On 1 Set [ 2 Drives ] or they are giving in sets

Jared , Thats white or Yellow Light You Use

Humm, Did i see something ,According to me that head has scratched the platter and is now smooth ,Thats the reason of so much dust in this drive .Specially that Head In Second Picture ,The First Picture Does Look All Fine

Bankole , I am not a member in their secret section ,So i do not plan to release my secret info in public ,If you want details come on Skype and i will train you on this but make sure that info is and will remain with you

Larry , Our Acelab Dealer in India Vikas Seth Has Been Doing Great Job With Such Drives .One Of My Students Amol Khadse Also Does amazing Work With these Drives .Head Swap is Possibly By Not Removing Ramp And Also Not Moving Heads To Platter .We To Are Now Able To Do It

awesome

Hi, In India We Call it Jugar .Its because of this jugar type work that few data recovery companies are offering super low rates and spoil the market rates .Due to this buying good equipment in india cost a lot of time as you can never collect those finances easier .Do you folks also have...

Well, I do keep my heads like this also ,As these days we are doing 5 to 10 head swaps a day .Also he is not wearing gloves at this movement because he has just finished cleaning one hard drive head ,And for that procedure he might have taken the gloves off .

Hi, I have seen a trend here ,The trend is that the USB boards are just plain dead ,You remove native rom fix it on data board and bammmmm .Most of these usb toshibas have such a issue now a days

Well, Virtually Daily i clean heads Mr Larry ,Absolute Success With My Technique ,Plus when i have Platters under the top platter then to i apply my own Technique ,In the next year we will start manufacturing our tools for sale hopefully if all goes well financially

Hello Surinder , We Are Based In Chandigarh ,Were Are You From ,Might be i could have a Look

Hi, No issues With Apple OS Browser to my side

Very Interesting , Jared , i see that in few families C5 says something and the hdd is is in different family ,So are you using PC3k as reference .Because when we have new family we might take family code from C5 Modules and in next update PC3K might say its different ?

@ Larry , Sems like the slim 500GB they are selling in WD Blue Series

Jared , You are wrong MRT does not have Boot Rom Mode ,It Just Lets to access SA using Com Port ,This Feature was available in the earliest versions of MRT also ,Its not added now a days in any new version

Well, What you said does not make any sense as if you can read SA Modules and logical access to user section is there ,Tracks definitely should be read .But as you said you cannot such thing can happen once in a while and do not have any explanation .The only thing you should try is try...

Mr Larry , See On the Top Right Side IT Says "Share/Save" ,Though I Feel its strange you do not see em in the place were even i see them .But I have Decided To Not Add Anything .The Reason is " Best Known To Me " And i Plan To Keep It That Way .Apologies I Woke Up The Issue Again .I...

Hi, Have Similiar Case i Have Original CnW with Dongle But Its Not Able To find .Mxf Files But Jihosoft is Doing a Better Job .

Jared , Please Check Atleast 24 Of My Last Messages or Posts and Do Tell Me the Percentage Of Criticisms I Have Done .I did check my posts randomly and do not feel the way you feel about me .Do check it Once Before You Comment Briefly Again .

Jared , No Experience but This is Exactly what i have heard from other pro Dr Guys Also

Well, You Seem To Be In a Mood To Beat Me Today ,No Problem [ Understand Fully Its Your Website And Your Forums ] .

Jared , I am currently sorting out a lot of HDD inventory in my lab i can easily handle that one list i told you about ,If i am given the responsibility And you could email me the list so that i could populate it with what i have under sorting .Is That All i do Here Criticise ? .Might Be...

Well, Atleast i would be interested to know how it goes

Hello, If you Think My Presence on this forum makes a difference can i have 2 links now .Since the day i said i will not use them i never used links in my signatures .I am One Of the Most Active Users Here in The Forums .

Hello Jared , Sorry if you feel bad but you are not maintaining any lists properly .Please Check this List -> identify-wd-marvel-families-by-code-after-the-dash-t636.html .Inspite Of Some of Us Telling You About Some Families .If You Cannot Handle That Can You Let Me Handle That List or...

Brother , Very Sorry No Experience With these Drives And No Access To PC3K SCSI/SAS Tools

Hello Jenny , Can You Provide Me Teamviewer Access To your PC Via Private Message ,I can Try and check this .Most Probably Its Heads

Hello, This is the only one that works properly -> http://dmeforensics.com/Technology/DVRExaminer

Hi, 99.99% he is serious

Well, My Dear Friend He is Just Wanting To Use " Terminal " Not His PC3K UDMA For This He Has Already Clarified This " Read His Post " .I think you Can Open PC3K UDMA Seagate F3 Common Utility And Work With Terminal .I am Sure Its 9600 or 38400 just like serial ATA Counterparts

Sir , i have a sherk LT 8 head stack done more then 5 recoveries with it and still strong

Jared , Seems Like Spam

Well, I Do Not Like anyone ,If He Makes a Tool Out Of Someone Else Research And Hampers Bread And Butter Of DR Firms And Small Individuals .I Have This stand Since a Long Time And Hence i stand by It .If You See I Am Very Vocal About It .Do your Own Research ,Make your Own Tool As Simple...

Well, You Have Your Own Opinion To Like Or Not Like My Comment ,My Suggestion To Him is Perfect ,Secondly I am from the same country and i know the financial mess thats going on here ,Professionals Use Pro Tools Not Kid Tools

Gps , Why Don,t You Buy MRT In Installment Mode ? .Instead Of Using a Software Thats Full Of Features Leeched From Research Of Other Individuals .MRT Has Decent WDC and Seagate Feature Support

Jared , I See This Fellow Posting ,Stealing Pictures On Multiple forums Using Multiple Accounts ,Banned Billion of Times

Welcome , The Bad Boy Amarbir[CDR-Labs] Says Jump In :mrgreen:

Well, This is Called New Year Party Hangover :mrgreen:

Hi , Thanks For The Info Sam Boss

Simple , Open It and Put The Head Exactly Where it Was Before You Worked On It .This is the way he gave it ,Return the drive to him in the same way

Sir , The Answer Is Yes ,You Can Try Demos os All Software Thats available On The Internet

Nice , I did a Unboxing Video For His Tool Also -> https://youtu.be/z2EGjxkGoec .A Tool Is a Tool It Has to be used properly .A Fool Will remain a fool whatever the tool as simple as that .

You Bet , Infact i Charge a Small Fee For Logical Cases Also [ Even If We Cannot Get Data Out ,This is Due To The Fact That We Spend Hours Trying To Get Data From Peoples Stuff ].3 And 4 TB Are a Pain In The ^%$%^$^ if you consider time

Yes, I like the forum quite a lot and i read old threads ,I have 23 pages pending .A discussion is a discussion

Jared , Most of the WDC do not work that way .Before ertools i used to remove ramp carefully take out heads off platter put ramp back put heads back on ramp

BTW , Each MCU gives signals to headstack .So the schematic might change if we use other family headstack .Example if pin no 1 of the headstack uses some voltage in one family it might be ground on other and end up smoking .Hence its just trial and error .Question for jared if the...

Humm, I and Pclab are going to beat the hell outta you if you do not let us know :mrgreen: .But well here in india man its 160gb,250gb,320gb,500gb,1tb and 2tb only most 99.9% of the time

Hi PCN , I tried all the stunts To get a better read ,But The ECC Application Is a Little Different Here .My dumps were 0,1,2,3 .We Needed To Rotate Them And Combine Them ,Then Only ECC Could Be Generated Effectively To Make a Good Recovery ,I will Make a Video On My Channel For This To Make...