Search results

  1. C

    WD40EMAZ - 00040017 - LDR required

    I wondered if anyone had a saved LDR for the following: ROM version............................. : 04.17H0 Module 4F F/W version................... : 00040017 Overlay F/W version..................... : 04.17H0 Servo F/W version....................... : A8.1U It's from a failed WD40EMAZ-11ZRJB0...
  2. C

    Cross Compatible WD Families

    Just tried the following: WD2003FZEX-00Z4SA0 (Vivaldi) Head-map 0,1,2,4,5 WD2000FYYZ-01UL1B1 (KOJN_RE) Head-map 0,1,2,3,4,5 Heads and PCB compatible.
  3. C

    Cross Compatible WD Families

    Dragon and Draco worked fine for me (WD30EZRX-00MMMB0 & WD30EZRS-42KEZB0 swap).
  4. C

    Seagate Preamp Pulled From ROM (Requests)

    Hello, Any chance you could take a quick look in this ROM. The "82 02" and "C2 02" donor I have used cannot write to the SA suggesting a mismatch. From: Model : ST1000LM035-1RK172 Serial : WL15364S Firmware : ACM2 Best regards, John
  5. C

    SED V2 Spyglass2 with damaged PCB

    Hello all, Well, it didn't take long. I received in my first PC-Shop mangled PCB that was on a Spyglass2 HDD. The PCB shop tried removing the ROM chip. That went wrong, and they managed to bend the PCB so that the BGA chip has detached. The original fault was that the USB connector was broken...
  6. C

    WD new unlock PCB 810035 is available

    Hello Jared, I am not sure if you have had the opportunity to use one of those PCBs yet? I presume the aim of this PCB adapter is only to allow access to the SA to access the firmware? That is, it is not possible to read the disk in an unencrypted format as the encryption keys are controlled by...
  7. C

    WD USB to SATA Conversion Compatible PCB Guide

    For: On USB 701672 the SATA equivalent 771672 it is necessary to check the final three characters and REV version as this defines the slight variation in the SH6601 motor controller. Wrong version and the HDD will not spin up. Regards, John
  8. C

    Cross Compatible WD Families

    Hello all, Just to add to the Diablo3D / Diablo3S compatibility: I've just been working on a failed Diablo3D. It was using a head-map of 0145 and I was struggling to find a suitable donor. I tried using a Diablo3S, with suitable DCM and microjogs. It provided some unusual results. It was...
  9. C

    WD USB to SATA Conversion Compatible PCB Guide

    Something I have spent some time scratching my head on this afternoon, for the PCB listed as: 2060-771737-000 rev A I had a Helios in, which used a 512KB ROM. Most of these use 256KB ROM, as do the SATA equivalent PCB. Consequently, I decided to transplant the chip as I could not find any...
  10. C

    SMI NVX656.00 SSD Controller

    Thanks for the reply. Yes, I suspect that this one shall be a non-recovery. All the best, John
  11. C

    SMI NVX656.00 SSD Controller

    Hello, We've just received one of these in ( SSDSCKKF256H6 ). It has similar symptoms to the SSD you had. SSD enters 'ready' on PC3000, but any command causes the SSD to enter BSY. Were you able to get your SSD into a work Tech mode or get any functionality from it? Thanks, John p.s...
  12. C

    SMI NVX656.00 SSD Controller

    Hello Jared, Did you get anywhere with this SSD? I've received one in (SSDSCKKF256H6). Same symptoms as your SSD. On power on gets to 'ready' in PC3000, but on any command enters BSY. I presume you could not get it into a working tech mode? Thanks, John
Top