Search results

Hello PClab sir, Kindly find the attachment attachment=0]348.2.GIF[/attachment]

Hello Sir, This Rosewood 2TB, ST2000LM007, after unlocking able to backup all sys files , expect sys file 348 both copies corrupt, unable to access any sector. Thanks Harish

Hello sir, I am planning to replace the head of WD WD20PURX kindly suggest matching and head adaptive transfer from donor to patient drive. patient Donor WD20PURX-64P6ZY0...

Hello sir, The pcb no : G3626A Thanks Harish

Hello sir, I am using Pc3000 latest ver, Toshiba MD04AB400V, in pc3000 utility which family to be selected. Thanks Harish

Thanks Harish

Hello sir, I am planning to buy dust particle measuring device , for my clean cabin , kindly suggest which one to buy . Thanks Harish

Hello sir, I have same model working hard disk(ST4000M004), its not showing any family only F3 Arch in PC3000 V6.5 Thanks Harish

Hello sir, Request Preamp version of attached rom. Thanks Harish

Hello sir, I am looking donor for following drive, even Donor drive its not available any cross compatibility drive. WD5000AAKKX-00U6AA0 DATE: 19 SEP 2012 DCM: DGRNNT2CHB THAILAND. Serial WCC2EC197863 Thanks Harish

Hello sir, Rosewood ST1000LM035, Capacity 0, sys file, 2B, 28(both copy) damaged, how to fix capacity after trans reg and restoring from sys file 28. Thanks Harish

Hello sir, Just write back sys file 93(removed reallocation read and write, MC) , also trans reg. I have spend more than three days( several attempts). terminal gives only few seconds to write back to hdd. Thanks Hatish

Hello sir, After several day attempt , it fixed sir. thank you so much. Harish

Hello sir, Yes sir its stuck busy(status), I can modify 93 file and save, when I check it again by reading from hdd , its all in as its original (No changes). Thanks Harish

Hello sir, Rosewood ST2000LM007, After selecting Rosewood 8c, family, terminal error, no terminal access, after few minutes hdd get identified, cont.. LED errorI have saved sys files 28,35,93,135. not able to modify Mc, realocation in 93. [ScrubRemove]...

Yes sir, case solved. Thanks Harish

Hello sir, Able to access sys files and full data. Thanks Harish

Hello sir, Seagate 2TB Rosewood ST2000LM007, After Techmode Unlocking(PCK3) Unable to backup any sys file(28,35,93,135) or access to any sectors. Assert 741D - LBA 12E37C7B! Starting LBA of RW Request=0012E37B89 Length=00001C68 ProcessRWError -Read- at LBA...

Hello Pclab, Same issue, I thought it might be a pcb issue. Thanks Harish

Hello sir, This is seagate ST500DM002, Terminal error: PreampFaultStatus = 0004 PreampFaultStatus = 0004 PreampFaultStatus = 0004 PreampFaultStatus = 0004 SIM Error 1002 LBA 0000000000046490 FD FCFFF3FF RW Error 44440080 LED:0x000000BD FAddr:0x00006454...

Thank you so much PCLab. Harish

Hello sir, Looking LDR for Model: WD10EZEX-08M2NA0 Rom:0006002 Family: Tresselb Tool: PCK3000 Thanks Harish

Hello sir, Looking LDR for WD10EZEX-08M2NA0, FW:0006002J, I have tried in HDDGuru database its not available, Thanks Harish

Hello sir, kindly Looking for preamp version. Thanks for cont.. support. Harish

Hello Jol Sir, Second time also I have read the ROM , the size only 1MB, Attached. Thanks Harish

Hello sir, Its a seagate 500GB Moments, wants head preamp version Thanks Harish

Hello sir, Its a seagate 500GB Moments, wants head preamp version Thanks Harish

Thank you Mr. Oladoja, How to fix the Rosewood ABR error, I am new to PC3000. Thanks Harish

Hello sir(Mr.Jared), I am Harish into data recovery since 2011 with data compass , last year I have purchased PC3000 , having lot of issues on seagate cases, I looking for support (offline or Remote). I have sent...

Hello, Can any one !!!

Hello sir, I want to add defect addition in nrg list like initial lba, size, flag from following track info: Track Info: Partition PhyCyl LogCyl NomCyl RadiusMils LogHd Zn LogTrackNum FirstUserLba FirstPba User 00000B6F 00000B6F 00000BE7...

Hello sir, One Seagate 1TB Rosewood detected ABR, SA, 28,35,93,135 backup done, any solution sir, also how to put back file 28 in to drive(after trans regn), I am using Pc3000. Thanks Harish

Trans. Spin Up SpinOK TCC:0027 SNOOOZZZZZZEEE Retry DOS: MAGIC CONFIG NUMBER MISMATCH (DOS) File Save (DOS) File Save MCMainPOR: Start: User Data Base 004411B0 Check MCMT Version: Current MC026: Reconstruction: MCMT Reconstruction Start [RSRS] 0000 Starting LBA of RW...

Hello sir, Thanks for your support, I am using PC3000 and Salvation Data compass, seagate doctor. Thanks Hatish

Hello sir, I don't have a donor sir. Harish

Hello sir, Request of preamp version, also is there any paid support available in this forum(For those who have access to the secrets section)kindly let me know sir at [email protected] I am interested to pay. Thanks Harish

Hello sir, This is Seagate SSHD ST1000LM014 NANO FLASH Remain busy , smooth running. terminal output: Boot 0x40M Spin Up RECOV Servo Op=0100 Resp=0005 Trans. Request spin / disc table recovery ASCII Diag mode unable to get terminal any solution sir, I am using Pc3k Thanks Harish

Hello sir, Thank you so much. Harish

Hello sir, sir just I want the preamp version of two attached rom. Thanks Harish

Hello sir, Thanks for your valuable reply .(supporting new comers like me). Harish

Hello sir, The above Hard disk having head issue, I am looking for donor drive (is it necessary to move head adaptive for above drive). Thanks sir Harish

Hi sir, I am looking preamp version of ::ROM Type: 0x62(SANYO) ROM Size: 0x100000 Saving ROM to profile folder File : C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\SgF3\F3 Arch (common)\ST1000DM003-CC45-Z4Y5FKB5\Data\ROM\ROM_Z4Y5FKB5_6FB4D041.bin Thanks Harish

Hello sir, Terminal of donor drive after putting back head from patient drive , is it necessary to move head adaptive from donor hdd.

Hi, Thanks for your reply, I put HSA back to donor its working fine. Patient Donor Z2A6NC05 Z2A766QW ST3500413AS ST3500413AS 9YP142-304 9PY142-304 JC4B JC4B 11477 11484

Hi, I am Harish from Srilanka, My doubt is , it is necessary to move the rom chip from donor drive to patient drive after head replaced(7200.11,12), Even matching all parameters its clicking sound only.I have tried in 7200.10 its working fine with out moving rom chip. I am using...