Search results

The same thing happened to me.. :?

I use the image all the time (It is known that there is a disagreement between the professional data recovery what is better) I had no such problem

how can explain those options clearly? thanks!

Do you have adapter with cable for ROM like this?

I have been working with this programmer for years and he reads directly form the board with auto detect but i cant read Toshiba ROM Because of no access to contacts so i have to take off the chip

thanks

what is that mean?

Where can I buy Data Recovery PCB without pay 1,000,000$ ..? Does anyone here have such a board? Please upload a picture of the pcb from both sides

https://youtu.be/AlE_N56S7qg

https://www.ebay.com/itm/RtI-ECO-Auto-S ... 9#viTabs_0

https://www.elm-usa.com/products/ecosmart

Do you create with this tool, image for USB drives Without replacing to SATA board?

https://www.guardonix.com/

Thanks!

Welcome : )

Why not order directly? You have all sizes in eBay for a few dollars

Can you upload video please? I want to see it.

Right now, I bent the head 0 imaging with a head 1

I took a new donor out of my stock for that (I never do experiments on the client's drive - P)

Model : ST1000DM003-1CH162 Firmware : HP34 Capacity : 931.51 GB (1 953 525 168) There is a scratch on the platter 0, The scratch is very close to the inside of the platter (to the motor) Is there a way to prevent the head to reach scratch? https://youtu.be/gmCOTz0YVfA?t=465 I tried to do like...

The next update will be in April or May 2018.

easier way.. http://blog.acelaboratory.com/pc-3000-f ... rsion.html

I have the tools of hddsurgery and Apex,In headcombs there is no difference.

I found an article on the comparison of the Air Quality Monitors https://explorables.cmucreatelab.org/explorables/air-quality-monitor-tests/

ST3000DM001 1E6166-570 W1F SC48 14187 WU B4 23

I'm interested in knowing how much he's worth compared to the one Jared uses

Anyone have experience with this? https://www.specksensor.com https://www.ebay.com/itm/Speck-Home-Air ... Sw3NlZtv9-

https://apextoollab.com/platters_holder ... er_2s.html

And find out it's the same, Like their other books ..

https://www.youtube.com/watch?v=y920ltV584o

confirmed. :D G3959A ----------> G3918A

Right, but we have not yet reached the goal -> replacing the ROM to the SATA board.

update: now donor working after clear G list & read by utility

G3959A ----------> G3918A Before I change heads I check first if there is no problem with the board (with the SATA Donor board and rom from USB board) I switched between the rom (IC2) from the G3959A to the G3918A To check if the board works after replacement I tried to read the rom through com...

do you know Which version of windows need for this program?

did you find how to do it?

Do you have the link?

I use Crest (cp230D) and I never saw they sell it. Do you know how much it costs? If the price is reasonable, I would try.

Last week I bought MQ03ABB200 from this seller.

Probably no one wants to be the first ..

http://www.dolphindatalab.com/product/h ... -training/ http://www.dolphindatalab.com/product/h ... -training/

evey pone is different. but this is can help in some cases. you can read the whole memory without remove the chip by isp, just find the right pin out. (Galaxy 5 from the last case.)

i have gpg emmc, gpg jtag, octopls+medusa pro. octoplus-medusa is good and easy jtag too because they has updates .(for samsug & lg, this phones that i used work with.) If it will be profitable I'll add more boxes to my collection, at least not for now. in most of cases, costumers not pay like...

I do not think I'm called an expert, but I do it. I prefer to work with a broken smartphone than a smart phone that works

+1

Congratulations on your purchase Have a lot of successful recovery cases With the new tool!

It is clear, also address - China And the design of the site is the same template

Does anyone have these tools? does it work? http://www.recoveryrus.com/ http://www.recoveryrus.com/product/seag ... -smart-2h/ http://www.recoveryrus.com/product/wd-s ... -smart-2h/

Does anyone have these tools? does it work? http://www.recoveryrus.com/ http://www.recoveryrus.com/product/seag ... -smart-2h/ http://www.recoveryrus.com/product/wd-s ... -smart-2h/

( https://www.youtube.com/watch?v=CsMD5EqWSUQ ) drives with more than one platter How It Works? What about alignment?

This happens when you choose Active topics

This happens when you choose Active topics

Yes, you are right. I checked it. (There was a problem with head 0) Imaging now..

What is family of this Hitachi?

Amarbir, I'm waiting to see a picture when your tool is ready

:shock:

It's not a new idea, but definitely useful this atpter was presented at a conference in Prague Too bad, it's quite expensive

Nice to read good news

nice

ACE Told me that it is possible

I fixed it

I thought that the TX and RX here.. https://www.youtube.com/watch?v=bZ11b5JwZcY&feature=youtu.be

can i read ROM by com port in toshiba usb?

WDC WD3200LPCX-24C6HT0 = HubbleLT (2.5)

Congratulations,

:lol:

The toy in the video is not so cheap .. I'm not looking to pay expensive but, I heard that not recommended to use cheaper Ultrasonic Cleaners For sensitive components If so, definitely not for heads Is it really true that using Ultrasonic Cleaners cheap can cause damage Ie- if there is a...

What do you say about that? Has anyone tried it? does it work? https://youtu.be/USSXbnPS-Nc?t=46

look at this There are new tools

:lol: Bacterial Data Recovery..

Welcome!

:D good!

http://blog.acelaboratory.com/wd-drives ... ature.html

Thanks,

Right, I am with you

I almost bought the tools of ER Tools Alexander did not respond to my last email And ACELABTOOL answered quickly, and bought from him Until now I thought it was the same one

Last week I released with this tool heads stuck to the surface, In Momntos 2.5 inches. The Image was green With only 26 sectors black Who has experience in replacing heads Like most of the friends here Can work with it without problems I have not seen any residue

Right, but not the only reason. I think that people do not like data recovery companies This is because they think that the data recovery labs charge them too expensive prices, And They have no idea how much it costs a data recovery equipment, and the amount of hours

Thanks,

Friends, I do not sell it. I bought one set And I want to share with you http://www.ebay.com/itm/122032981687?_t ... EBIDX%3AIT http://www.apextoollab.com/

thanks for sharing

Is the original heads?

Thanks,

I recovered files after the client make system recovery Instead a backup The problem I have an Excel files, are opened But garbled text Does anyone have a recommendation for a good software to repair Excel files and Word files? Or another solution Thanks,

Thanks Jared ! :D

Jared, help me please. :?

Now I know how to do it :D I will not write here how to do it because Jared would not be happy about it.. ;) Anyway Thanks for the idea

contact admin & admin I tried both

I can not log in

Thanks :)

At the end if you get that? I need it too And ROM

.