Seagate ST320413A

[pclab]

Hey guys

I have a strange log on this Seagate.
I have swapped heads on it. The donor is very similar and I think it went OK (at least it doesn't click heehehe)

I have this log:
T>Head Mask 0003 - Switch to full int.
Ready

T>$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

It doesn't ID...
Tried with the Donor PCB and it doesn't do those $$$$$.

This is the log with donor PCB:

Interface task reset
1024k x 16 buffer detected
U5 - 1_Disk 3.57 12-12-00 10:03 coonend

Power Cycling
ATReset

Ref 0265 - Head Mask 0001 - Switch to full int.
Ready

T>U5 - 1_Disk 3.57 12-12-00 10:03 coonend
Built for U5,SaratogaII,Magellan,InternalSpin,GC85,Copper-clad VCM,2Disk,LowDelta,192 Servos,8Pole,NonModGray,2x,80MHz,Code DRAM,Early Exit,RwFeat=2000

T>Age=60 Type=61 MxCyl=72C8 MxHd=1 MxSct=244 BSz=0800 TCode=0000

T>
Age Typ Hds Lent Loopcnt TrkGn Thld Grey Intg TrkOfst SpnIntg
60 61 1 0000 0000000 0096 0028 9696 9696 4F4D E6A3

T>INVALID Cert Disk Code - ROM Resident Revision Required: 3.57

The Firmware version of Pacient is 3.32 and donor 3.57.
Can this be the problem?

Thanks

PS: I can read tracks

 

[irs]

hi pclab

T>$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$+$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

each $ character means a calibration attempt, so this drive is not calibrating well

Age=60 Type=61 MxCyl=72C8 MxHd=1 MxSct=244 BSz=0800 TCode=0000

the preamp and heads are detected (this drive has 2 heads) but it's in age60 like when starting with a loader, try to switch it on Age 50 and check SA modules.

T>INVALID Cert Disk Code - ROM Resident Revision Required: 3.57

The Firmware version of Pacient is 3.32 and donor 3.57.
Can this be the problem?

if you changed heads only the CERT should be correct ... try to read CERT and CERT tables to see if they are corrupted.
bye
Luca