Seagate EXOS X16 ST16000NM001G

chris2ferz

New member
this is a fairly new drive 16TB
Drive idents to PC3K but does not initialize to the file system
this is the terminal output
thinking firmware issues or media cache.
anyone have ideas for this?
Thanks


Boot0x0100MAX0122SN02Motor startedHeads loadedPass w/o polarity switch
Trans
Rst0x0100MAX0122SN02
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:00000090HB_Alloc:0000FlashRestorePowerDevReg7E:0001 PowerDevReg7D:0000MD_Saved:00000090HB_Saved:00000000MD_CRC:CFB7
PP:MD_Alloc:0000F000HB_Alloc:0000FlashRestore
PVTSize:0010CE8C CompSize:00002204 DeCompSize:0010CE8CMD_Saved:00002204HB_Saved:00000000MD_CRC:A025
TW:MD_Alloc:00000400HB_Alloc:002EFlashRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:2493
WCD:MD_Alloc:00040000HB_Alloc:1293FlashRestoreMD_Saved:000009BBHB_Saved:00000000MD_CRC:15D6
GC:MD_Alloc:00005000HB_Alloc:0000FlashRestoreMD_Saved:00004348HB_Saved:00000000MD_CRC:7108
DSP00CA
2Sync:0 4
ASCII Diag mode

LPower=
HPower
TCC:0014 Humidity:0.0% Pressure:683 mBars PartialPressure:684.32 mBars EMCDataErr:00000000 Req=0038 Status=0001ACTIVE
F3 T>
Diagnostic Port Locked

Boot0x0100MAX0122SN02Motor startedHeads loadedPass w/o polarity switch
Trans
Rst0x0100MAX0122SN02
(P)SATAReset

NVCScramSavedHBSize:020A
LD:MD_Alloc:00000090HB_Alloc:0000FlashRestorePowerDevReg7E:3801 PowerDevReg7D:0000MD_Saved:00000090HB_Saved:00000000MD_CRC:DF01
PP:MD_Alloc:0000F000HB_Alloc:0000FlashRestore
PVTSize:0010CE8C CompSize:00002204 DeCompSize:0010CE8CMD_Saved:00002204HB_Saved:00000000MD_CRC:A025
TW:MD_Alloc:00000400HB_Alloc:002EFlashRestoreMD_Saved:00000160HB_Saved:00000000MD_CRC:2493
WCD:MD_Alloc:00040000HB_Alloc:1293FlashRestoreMD_Saved:000009BBHB_Saved:00000000MD_CRC:15D6
GC:MD_Alloc:00005000HB_Alloc:0000FlashRestoreMD_Saved:00004348HB_Saved:00000000MD_CRC:299B
DSP00CB
2Sync:0 4
ABORT!
OpCode=00000024
SenseCode=0B090400
ReadyStatusFlags=0102A1E0

ABORT!
OpCode=00000024
SenseCode=0B090400
ReadyStatusFlags=0102A1E0

ABORT!
OpCode=00000024
SenseCode=0B090400
ReadyStatusFlags=0102A1E0

ABORT!
OpCode=00000024
SenseCode=0B090400
ReadyStatusFlags=0102A1E0
#-CF1
 

chris2ferz

New member
pclab":xv7jekh6 said:
Have you contacted ACE TS?
Yes.
They dont have a way to work with this drive yet.
I guess the only option is to wait for the utilities to catch up to the technology
 

pclab

Moderator
Yeah, sometimes it takes a while for them to investigate and do the necessary research for new models.
 

Jared

Administrator
Staff member
Have you tried unlocking the ROM with the latest PC-3000? I know they have a newer, second unlocking method which I've never yet needed. If you can unlock the ROM and get terminal access, then things might be possible.
 

chris2ferz

New member
Ace Labs still says they don't have a utility for this family of drives yet - was hoping maybe someone here might know more or have another way
 

Jared

Administrator
Staff member
Regardless of having a utility, you can do a lot over terminal. But you first need to investigate whether the ROM unlock is supported to get terminal access. I've recovered plenty of Seagate drives that PC-3000 didn't have utilities for by just using terminal commands.
 
Top