Need firmware or file LDR WD2500AAKX

jenny

New member
Technology mode key : ..........................: OK
RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 1
Head map : .....................................: 1
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xFE16
Control version : ..............................: 63B0
Zone allocation table : ........................: Err
ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 256 Kb
ROM version : ..................................: 05.0KG
ROM generation : ...............................: 05.0MG
Link table version : ...........................: 0A.09
ROM Firmware version : .........................: 0005000K
ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 1
Heads number in use : ..........................: 1
heads map : ....................................: 0
SA Module Dir Loading...
Load SA Module dir : ...........................: OK
Configuration reading : ........................: Err
 

Jared

Administrator
Staff member
jol":dnjiwjmp said:
there are plenty of those who have only 1 head
http://www.donordrives.com/catalogsearc ... WD2500AAKX
as a matter of fact all donordrives results for this ROM FW ver. has only 1 head
http://www.donordrives.com/catalogsearc ... X+0005000k

I'm not questioning that it only has one head, that's blatantly obvious. But, it shows two different things for the headmap based on ROM/RAM

As you can see here:

jenny":dnjiwjmp said:
[post]8178[/post] Heads number : .................................: 1
Head map : .....................................: 1

jenny":dnjiwjmp said:
[post]8178[/post] Heads number : .................................: 1
Heads number in use : ..........................: 1
heads map : ....................................: 0
 

jol

Member
Oh,

maybe the OP tried some manipulation with the heads, thinking to be able to read/get access to the drive/SA, using the other head/copy (which in this drive obviously doesn't exist)

will have to what for the OP to reply to "your question" then
 
Top