Recent content by Freekingeeks

No errors in reading

Hello, Yes I can execute the terminal commands and have already downloaded all of the essential SYS files.

Hello, This rosewood drive gets ready but goes to BSY as soon as I try to access any sector. below is terminal output. (P) SATA Reset RAW OFF PASS Drive AMPS Configuration has been modified from compiled defaults. Drive must be re-initialized to controller firmware defaults by...

I have 10 Head Donor drive 5TB Seagate barracuda ST5000LM000. Patient drive is 4TB ST4000LM0024 which is having 9 Heads. Until now we have replaced with HSA having more heads than patient HSA but more heads were on the upper side which was all successful. This case is where the bottom head is...

Done! ?

Hello, Is there any solution available for spyglass slow responding issue. this issue first reported on hddguru in 2017. wondering if anyone has managed to slove it successfully. I am able to read max 60kb/s. Regards

Hi, I have WD Hubble 500GB WDC WD5000LMVW-11VEDS3 drive. All essential modules are ok. But 33 plist on head0 is bad in zeros. 1. Can I reduce its size in dir editor? 2. Sectors are not accessible without using utility. I can decrypt and access sectors in utility by using "use utility" option...

Hi Jared, Yes, Its Palmer.

Hi Everyone, Looking for WD10SPZX-24T10T1 firmware. ROM F/W Version 00050066. I have used unlocked SATA Pcb but getting error “VSC ERR INV FUNC CODE REQ”.

Because of difference in PreAmp?

Patient Donor SN: W1E2DFAJ W1E0S6N0 ML: ST2000DM001 ST2000DM001 PN: 9YN164-306 9YN164-306 FW: CC4H CC4H Date: 13217 12514 PreAmp: CB06 B303 Site: SU...

Works perfectly fine!!

Does anyone know sure compatibility between Tahoe LT and Tahoe PL? PATIENT = Tahoe LT - WD5000AAKS-00UU3A0 DCM:DGNCHTJMHN 29OCT2010 DONOR = Tahoe PL - WD5000AAKS-22V1A0 DCM:HHRNNTJCAN 26MAY2010

Hi Jared, are these swabs good for cleaning platter surface for fingerprints and debris?

Thank you all for all your reply and suggestions. Removed platters with the help of stickers, used the plastic stick to remove the slider and that's it. Drive now imaging. :D