User avatar
pclab
Forum Moderator
Posts: 1716
Joined: Tue Jan 13, 2015 4:55 pm
Contact: Website Facebook

Looking for a WD

Mon Apr 27, 2015 6:03 pm

Hi

I'm searching for a
WD2500BEVS-11UST0
09 jan 2009
DCM: FACT2BBB - Thailand
PCB: 2061-701499-600

Thanks
www.pclab.com.pt
facebook.com/PCLAB.Assistencia.Tecnica

User avatar
w.simon
Forum Moderator
Posts: 148
Joined: Wed Jan 14, 2015 11:41 am
Location: France
Contact: Website Facebook Twitter Google+

Re: Looking for a WD

Tue Apr 28, 2015 3:51 pm

Hello

This is a very common hdd, you don't have a close as : WD2500BEVS-XXUSTX is your stock, or you can use a WD3200BEVS in place head map should be 0/1/2/3 on your patient.

Good Luck
A.G.D.I Data Recovery in France
Dolphin Data Lab Official Partner
Récupération de Données

User avatar
Jared
Forum Admin
Posts: 3734
Joined: Mon Jan 12, 2015 12:32 pm
Location: Providence, RI
Contact: Website Facebook Twitter Skype YouTube Google+

Re: Looking for a WD

Tue Apr 28, 2015 5:10 pm

The model is common but that "CT2" DCM code seems to be elusive.

This one might work: http://www.ebay.com/itm/Western-Digital ... 1c4fa290b7
Only it's 4 months off on the date...

User avatar
pclab
Forum Moderator
Posts: 1716
Joined: Tue Jan 13, 2015 4:55 pm
Contact: Website Facebook

Re: Looking for a WD

Wed Apr 29, 2015 11:46 am

I was trying to match the 11UST0 too.
I have a XXUST0 in stock. i will try it.

Thanks
www.pclab.com.pt
facebook.com/PCLAB.Assistencia.Tecnica

jol
Data Recovery Pro
Posts: 679
Joined: Thu Jan 29, 2015 11:31 pm

Re: Looking for a WD

Wed Apr 29, 2015 12:01 pm

no need even the same family (and not the same model at all) can be a match
and of course, if you have the same model on the first part, and 2-3 middle characters of the second part, can match

User avatar
Jared
Forum Admin
Posts: 3734
Joined: Mon Jan 12, 2015 12:32 pm
Location: Providence, RI
Contact: Website Facebook Twitter Skype YouTube Google+

Re: Looking for a WD

Wed Apr 29, 2015 12:36 pm

Agreed, the first two digits and last digit after the dash don't matter as far as I can tell. I'd take a -60UST0 with a closer DCM over a -11UST0 with that further off. If the drive you have has CT2 in the DCM and a date within a few months, it should work.

User avatar
pclab
Forum Moderator
Posts: 1716
Joined: Tue Jan 13, 2015 4:55 pm
Contact: Website Facebook

Re: Looking for a WD

Wed Apr 29, 2015 1:06 pm

Thanks Guys.
www.pclab.com.pt
facebook.com/PCLAB.Assistencia.Tecnica

irs
Data Recovery Noob
Posts: 43
Joined: Wed Feb 04, 2015 3:52 am
Location: Italy
Contact: Website

Re: Looking for a WD

Thu May 14, 2015 11:34 am

hi, i think any MCKinley with the right DCM should work, i would keep the same family for areal density match (check SPT values ;) )
about the other values on mdl:
WD2500BEVS-11UST0

customer id 11 is WD Protégé OEM
family id US is mcKinley
customer configuration code T0 should be generation 0 for specific reseller (internal code T)

so you can match only US ... other possible McKinley are SN UR SP SR and UT

bye
Luca
Luca Marella

Data Recovery pro in Italy
http://www.ultrarecovery.com

User avatar
pclab
Forum Moderator
Posts: 1716
Joined: Tue Jan 13, 2015 4:55 pm
Contact: Website Facebook

Re: Looking for a WD

Tue May 19, 2015 7:06 pm

Hey Guys

So, I followed your advices and got a UST drive.
Heads swapped, some work on FW and data is getting out.
Thanks
www.pclab.com.pt
facebook.com/PCLAB.Assistencia.Tecnica

jol
Data Recovery Pro
Posts: 679
Joined: Thu Jan 29, 2015 11:31 pm

Re: Looking for a WD

Tue May 19, 2015 7:10 pm

great

Return to “Donor Hard Drive Market”

Who is online

Users browsing this forum: No registered users and 0 guests