jerovsek
Data Recovery Novice
Posts: 53
Joined: Thu Jan 15, 2015 2:28 am

Flash programmer

Wed Jan 13, 2016 2:24 am

Hello,

I use TL866CS flash programmer.
I'm looking for new one, but I would like to ask, is any programmer with auto detection function.

User avatar
LarrySabo
Data Recovery Master
Posts: 845
Joined: Mon Jan 12, 2015 8:15 pm
Location: Ottawa, Canada
Contact: Website

Re: Flash programmer

Wed Jan 13, 2016 10:28 am

I bought a Reveltronic programmer which I have used just a couple of times but I forget whether it auto-detects the chip. Here's the user manual so have a read: http://www.reveltronics.com/downloads/u ... manual.pdf

On one chip where I had a question, I got a fast reply to my e-mail to support, so I was pleased with that. You do have to set the voltage yourself, so be aware of that. it's also very fast!

jerovsek
Data Recovery Novice
Posts: 53
Joined: Thu Jan 15, 2015 2:28 am

Flash programmer

Thu Jan 14, 2016 3:12 am

Thank you very much Larry

HaQue
Forum Moderator
Posts: 224
Joined: Mon Jan 12, 2015 7:56 pm

Flash programmer

Thu Jan 14, 2016 4:21 am

You may not want to rely on this function even when it has it. Reading up on it seems that it is not foolproof:
My Dataman programmer tells me the following:

"The programmer applies a high voltage to the appropriate pins on the socket. Don't insert device into the socket that isn't an EPROM or FLASH, it may be damaged. This service is applicable only for devices in DIL package or any other non-DIL package using 1:1 wired package convertor. The control program only support this time EPROM's and FLASH with 28 and 32 pins.
We don't recommend to apply this function to 2764, 27128 EPROM. Most of them haven't ID.


more info on this reference: http://www.aussiearcade.com.au/showthread.php/39644-wellon-eprom-programmer-and-auto-detection-of-eproms

jerovsek
Data Recovery Novice
Posts: 53
Joined: Thu Jan 15, 2015 2:28 am

Flash programmer

Thu Jan 14, 2016 5:09 am

thank you HaQue

Return to “Data Recovery Tools”

Who is online

Users browsing this forum: No registered users and 0 guests